Recovry4x4

I need t clear this up a little bit. The inner and outer bearings are different. Going from memory one is a 3994 and the other a 392. The outer dimensions are the same its only the center bore that is different. The bearing races are the same. The net effect of this is if you want to keep the same bearing with the same race, you will need to swap races from side to side in each hub. Since the races are the exact same, you can opt to just filp the hub. The inner bearing (larger bore) will still be the inner bearing but it will be riding in the former outer race. As Bjorn said, he did this and had no problems. I've done it too without problems. Bearing mnufacturers reccomend that the bearing and race remain a pair.

__________________
Arm yourself with the sword of knowledge, read the TMs.

http://www.steelsoldiers.com/technical-manuals/

This Steel Soldier Honors the Living Memory of David Frankenhauser, 1954-2009.
May you Sail in the Grace of Our Lord, Chaplain!

“The earnest prayer of a righteous person has great power and produces wonderful results.” James 5:16.