Steel Soldiers::Military Vehicles Supersite - View Single Post - CUCV: Won't Start; NO FUEL... How to bleed out air?

mangus580 · 05-26-2006, 22:12

Quote:

I couldn't get the wire pulled off the spade connector on the glowplug for fear of snapping the small spotweld. Do you have ot do anything(push a little tab, stick a screwdriver in a slot?) to the black connector or just pull it straight off? can I pull on the green wire or will it ruin the connector? I proceeded to do your test with the green wire still connected.

Don't have a test light. If I did the light would turn on. I have a voltmeter. I get 12.3 volts when doing your test.

I suspect that with all the wires hooked up, this will give you false readings. For example, if you have 1 good plug, it could show that all of them are good with the wires all hooked up. Not sure about a locking tab on these, hopefully someone else can pipe up with this.