Tnrobocop

It's a pretty straight forward installation. I just did a Sony Explode CD player install about two weeks ago.

One wire for ground and one wire to the fuse block. There are four places to run a hot wire, but only three are what you want. One is a 24V, the other three are 12V. The one on the right is a constant hot, the two you can use on the left are only on when the ignition is hot.

You will have to cut out some of the original metal in the dash and some on the plastic dash cover for fitting around a radio. You will probably have to drill some holes and use sheet metal screws to hold the radio bracket in place.