G-Force

if you look in TM9-2910-226-34 in section 3-40 there is an exploded view of the throttle linkage. That idle stop cam assembly is secured to the throttle shaft with a bolt that pinches the stop assembly onto the splined throttle shaft. There is also a snap ring in front of the cam assembly. Remove the throttle arm and see if the split in the stop cam is in line with the line that is scribed on the end of the throttle cable. I think you'll find that it isn't. All you have to do is reorient the stop cam on the throttle shaft to align the split in the cam with the line that is svribed in the end of the throttle shaft. But watch because you might gain rpms at the top end and may need to readjust the high speed stop. Check I think page 3-54 of the TM. I think it shows the orientation of the stop cam on the shaft. Let us know how you make out.