Steel Soldiers::Military Vehicles Supersite - View Single Post

Steel Soldiers::Military Vehicles Supersite

Forum Rules

FAQ

» Log in
User Name: Password: Remember Me? Not a member yet? Register Now!

» Online Users: 312
106 members and 206 guests
123mack , 1942 Mk1 , 1943ht , 212sparky , 319 , akonitony , ammodude , ARYankee , bassetdeuce , Beerslayer , Bob H , BobH , Buz , Buzz , calpyro , chvss65 , clinto , coledanger , coop , coyotegray , cpf240 , Csm Davis , Dan Uplinger , Darrin , davem3racer , dezert ratt , DieselInfantry711 , Dieselking22 , Dlsorange , dmistretta , Doubled , dstang97 , eric67camino , finnd1 , fuzzyone28 , fuzzytoaster , gbest , gunboy1656 , H1redwagonman , HASSON1911 , hcso1988 , Healy , hndrsonj , hufficon , HVYMTL , ihmopar , jeepzilla47 , jrobinson5093 , justacook , JxxxOxxxE , ljjl60 , loxahatcheeman , M215 , Ma Duce , Mainsail , MasterSweeper , Matt65 , MIG23UB , mikeseal43 , mudman , Mwne2nks , NDT , Needle , NEWFDAD , oldnorthbridge , panheadric , panzerwillie , paradeduty , popacom , porkysplace , RAYZER , Repo3004 , RetiredNavy , RIDDLE1 , robert william , Roboskid , rrrr , rumplecat , Ruppster , Rustygears , sandcobra164 , Shawn MacAnanny , skiman , SMOKEWAGON66 , sojourner , SouthernSteel , stationjj , steelandcanvas , Ten bits , tjmilitary , topo , Truckfreak , Truckoholic , Vfflang , walkerhunter , wallew , WantOne , Warthog , WillWagner , Woodsplinter , Wwallsfour , xtsix , zebedee , zerogas , zone zero
Most users ever online was 902, 10-29-2011 at 04:09.

Thread: Deuce and half drive shaft ???

View Single Post

11-15-2009, 22:49

#5 (permalink)

highrollin4mud

Private

Join Date: Mar 2008

Location: waretown NJ

Posts: 3

this is what i am making drive shafts for
i just need to buy tubing in length of at least 72 inches
i already have the ends that i cut off a stock deuce drive shafts
so i can just press into the tube and weld them up to my own lengths
i done it before but the place i used to get tubing from is no longer in business
so i need to know were i can order it from
thanks Harold

Attached Images

	078.jpg (64.2 KB, 18 views)

All times are GMT -4. The time now is 23:27.