vtdeucedriver

Looking for the airfilter that pre cleans the air before the can filter on the 5 tons. Seen them on M123's and 5 tons.

Thanks for the help.

__________________
1951 M37 MVPA #17452
1953 M62 GMMVC Member
1964 M151A1 Associate Member of the ATAV
1968 M151A1 Founder of:
1967 M54A2C The Rolling Line Haul Museum
1968 M52A2
1967 M127 Trailer

"This was the Noblest Roman of them all"
Antony, Act 5 Scene 3, Line 68 Julius Ceasar

cranetruck

I have seen them at farm supply stores...used on tractors.

__________________
Bjorn

MEP-018A (needs new generator head)

Avatar: XM757 in OK prepared for 1,000 mile trip home. Part of 6,000 mile journey in 2006.
1968 M49A2C modified with 1960 M756A2 truck bed and 1975 HIAB 765A knuckleboom, exhaust brake and more. (SOLD)
1969 Ford XM757 8x8, 5-ton Pershing 1A truck tractor...the "improved MV".

"Some things can't be made better, just differently......a lot of things actually"

vtdeucedriver

here is a pic of what I am looking for.

Attached Images

	wrecker1_197.jpg (33.6 KB, 680 views)

__________________
1951 M37 MVPA #17452
1953 M62 GMMVC Member
1964 M151A1 Associate Member of the ATAV
1968 M151A1 Founder of:
1967 M54A2C The Rolling Line Haul Museum
1968 M52A2
1967 M127 Trailer

"This was the Noblest Roman of them all"
Antony, Act 5 Scene 3, Line 68 Julius Ceasar

rumplecat

I have one on my M543 but it is hollow, no filter in it, just a large inlet cover! I can get a better shot if you need it.
James G.

Attached Images

	pict0430r_982.jpg (141.8 KB, 633 views)

__________________
KTALGSTO

M543A2, M813A1, M818, M813WW, M35A2, M35A2WW x 2, M35, Burma Jeep GTBC '43, M416 X 3, WC 52, M715 x 4, M724, 6217, M37 x 4, M1008,Pioneer Tool Trailers x 2, Light Tower Trailer, M101 x 5, M116 x 2, M101A2 x 3 M105 x 12, M1061E1, M796 X 2, M127A2C X 2, M448, M332, M128A1, M198, 1947 Dodge Power Wagon

Jones

If it's like ours it just a dirt/dust seperator. No filter element in it; it just spins the air so that the crud is centrifically removed.

__________________
Jones
Sacramento, California

baby HEMTT

cranetruck

As note of interest, the m656/xm757 trucks have a "2-stage" filter with built-in vanes to get the air circulating. The end section is the dust collector.

Attached Images

	xm757_air_cleaner_589.jpg (130.1 KB, 593 views)
	xm757_air_cleaner_open_196.jpg (130.4 KB, 588 views)

__________________
Bjorn

MEP-018A (needs new generator head)

Avatar: XM757 in OK prepared for 1,000 mile trip home. Part of 6,000 mile journey in 2006.
1968 M49A2C modified with 1960 M756A2 truck bed and 1975 HIAB 765A knuckleboom, exhaust brake and more. (SOLD)
1969 Ford XM757 8x8, 5-ton Pershing 1A truck tractor...the "improved MV".

"Some things can't be made better, just differently......a lot of things actually"

acetomatoco

Jeff Symanski was selling them at Aberdeen a coupla years ago... I have one on my M543A2... It is a precleaner... just to keep the big crud out of the real filter...

rmgill

Bjorn, that's how the airfilters on the 5 tons are set up (M813s and M54s). Same vanes and such.

__________________
Ryan Gill
15 Recce Re-enacting Group

1943 Humber Mk IV Armoured Car
1947 Jeep CJ2A basket case
1960 Daimler Ferret
1972 AM General M35A2
x2 M514 1Ton2Wheel Trailer

cranetruck

Thanks for pointing that out Ryan, I had a filter canister from an M543 at one time and it was just a simple "barrel", must have been an exception....

__________________
Bjorn

MEP-018A (needs new generator head)

Avatar: XM757 in OK prepared for 1,000 mile trip home. Part of 6,000 mile journey in 2006.
1968 M49A2C modified with 1960 M756A2 truck bed and 1975 HIAB 765A knuckleboom, exhaust brake and more. (SOLD)
1969 Ford XM757 8x8, 5-ton Pershing 1A truck tractor...the "improved MV".

"Some things can't be made better, just differently......a lot of things actually"

TacticalTruck

I still have them available. NOS, semi-gloss, 1970 year of manufacture. $50+shipping.
Jeff

Attached Images

	5907_046_347.jpg (35.6 KB, 520 views)