bevanet

I didn't want to start a thread for this, but I really searched pretty hard and couldn't find this info. I am about to change oil on an M813 with the NHC-250 engine. I have the filter and oil, but I haven't been able to find the gaskets that go on the filter housing. If anyone knows which stores carry these and what the part numbers are I'm sure it would be helpful to many. I agree that a spin on fliter is a better solution, but the truck gets very little use. I hate to spend extra $$ for a spin on when it won't save very much time over the next several years. Information on multiple stores would be helpful since we live in various states. Thanks!

doghead

Did you try google searching the NSNs?

__________________
M818, M819, M35A2 w/w, M35A2, M109, M561 w/w, M274, M1008A1, M146, M105, M116A2, M101A2, Pioneer tool trailer, MEP-002, MEP-017A, 1990 Dodge Tug, 5ton winch shear pins


Proper Use of Capitalization and Punctuation

bevanet

I ordered these from Checker / O'reilly. They are a wix 15271. I hope to try them out in a few weeks. I'll post if they work or not.

bevanet

I got the oil change this weekend. The wix 15271 fit perfectly. I didn't replace the washer on the end of the canister bolt, but it isn't leaking. I did this late in the evening, so it was getting dark out. After I loosened the canister and let the oil drain over the front diff, I noticed that the canister has a plug that must be used to drain the oil before taking it off. I'll try that on my other truck to make a little less mess hopfully.