A friend of mine wanted to change the plastic lines, So he went with copper lines, I dont know if he finished it yet, But the line and the fittings are readily available from any home improvement center.
__________________
Scott
1971 M813A1 w/w
1971 M35A2 W/W C turbo
1971 M35A2 D Turbo ( sold)
1970 M35A2 C Turbo
1970 M35A2 D Turbo (sold)
1987 M105A2
1988 PU 794/G on a M200A1
1987 M105A2 www.thestonemasterofnj.com
i get mine from truck pro.. its not white its black... and a biggie.. as was told by the counter guy.. you buy the line.(real cheap) and the pherrals.. but you need a special inner brass insert.. its job is to not let the plastic line collapse as your tightening it up.. they are cheap.. 20 cents each im thinking and you only need 4. the orings arent hard to change. you said you changed the fuel filter... did you make sure the square washer wasdown in the hole before tightening up that top bolt?
If you did tighten the square washer where it was NOT down in the recess, you BENT it and will not seal if put in the recess and tightened, you have to remove it and FLATEN it so it will seal when reinstalled, ask Tim, he has FIRST hand knowledge with this tid-bit of MV info.
__________________
Ron
Gainesville, Ga. vietnam-1/66-8/68
"Technical Manuals are the path to Illumination...
Download, Study Learn"---rlwm211
42 5t? autocar tractor, gone
43m20, 12t, converted to tractor, gone
52m52, tractor, gone
73m819, tractor/wrecker AKA Wrecked Wrecker
77xm977 10t 8x8, to be a xm 983 sold
What ever else that can be drug home Use CUCVs, a small step below BOBBERS as wheel chocks
GOD help the MV world if i win the LOTTERY
LONG LIVE BIG GREEN IRON
The Following 2 Users Say Thank You to 73m819 For This Useful Post:
