M35A2-AZ

I took off my axle vents and put in some piping and hooked them all up to a central vent under the hood up by the motor.

Our road is very dusty, not sure if the dust did it or not, but one of the vents stopped working and blew out a seal and washed out all the grease in the bearings.

Attached Images

	100_6959.jpg (71.2 KB, 148 views)
	100_6998.jpg (46.3 KB, 147 views)
	100_7000.jpg (38.0 KB, 146 views)
	100_7001.jpg (49.6 KB, 152 views)
	100_7002.jpg (45.8 KB, 141 views)

__________________
71 M35A2 w/w
85 M923A1
86 M931A1
69 M35A2 wo/w
71 M35A2 w/w
M332
M105a2
M105a2 for sale

rrrr

Is that a 939 series truck ?

I've been thinking about doing that with my 932a1. I plan to have a little fun with the truck !

What type of air line did you use ?

dpms101

Yep good idea , I used to do the same on my jeeps , does help with water getting in

M35A2-AZ

Yes it is a M923A1. I used parts from Parker with plastic tubbing, like air line tubbing.
I used 5/16" line. After I got the parts I found some fitting that are 1/8" pipe and 3/8" tubing.
So I would of used 3/8" tubbing, but I think the 5/16" will work fine.
It took about 48' of tubing.

__________________
71 M35A2 w/w
85 M923A1
86 M931A1
69 M35A2 wo/w
71 M35A2 w/w
M332
M105a2
M105a2 for sale

wsucougarx

Great idea my friend. Chalking this up for my "soon to be" 923 project list. Just need to find a 923 first

__________________
Mike
God Bless America
John 3:16
1988 M109A3 w/w,VIC1,VRC12,AOM "For God & Country"
1988 M35A2C w/w,VIC1,VRC12,AOM "The Trinity"
1968 M35A2 w/w,VIC1,VRC12 "Exodus"
1983 AM General M923, RRAD, VIC1 "JY"
1987 M105A2
1985 M105A2 (Expedition Trailer Project)
1967 M105A2 (Storage Unit for now)
1978 PU-650B/G 60kw Gen/M200a1 "The Brick"
M939/M923/M925/M931 Winter/Cold Weather Masks FOR SALE
http://www.steelsoldiers.com/parts-sale/83303-m939-m923-m931-m925-winter-cold-weather-masks-new.html

M35A2-AZ

Thanks!!
I think I am going to do it to all my truck at so point.

__________________
71 M35A2 w/w
85 M923A1
86 M931A1
69 M35A2 wo/w
71 M35A2 w/w
M332
M105a2
M105a2 for sale

73m819

on the end of the vent line, install a cheap inline gas filter, this will keep the dust out but allow the vents to breath

__________________
Ron
Gainesville, Ga.
vietnam-1/66-8/68
42 5t? autocar tractor, gone
43m20, 12t, converted to tractor, gone
52m52, tractor, gone
73m819, tractor/wrecker AKA Wrecked Wrecker
77xm977 10t 8x8, to be a xm 983 sold
What ever else that can be drug home
Use CUCVs, a small step below BOBBERS as wheel chocks
GOD help the MV world if i win the LOTTERY
LONG LIVE BIG GREEN IRON

groundog

i re-placed my vents on my 931---removed fill plug to check oil in rears and air came out-so i knew i was in trouble---replaced two axle seals---those brake drums are heavy

73m819

YEP, you can replace ALL FIVE vents with a fittings and vaccum hose faster then replacing ONE seal, I would add the master cylinder to the vent system, if not adding then give it it's own line

__________________
Ron
Gainesville, Ga.
vietnam-1/66-8/68
42 5t? autocar tractor, gone
43m20, 12t, converted to tractor, gone
52m52, tractor, gone
73m819, tractor/wrecker AKA Wrecked Wrecker
77xm977 10t 8x8, to be a xm 983 sold
What ever else that can be drug home
Use CUCVs, a small step below BOBBERS as wheel chocks
GOD help the MV world if i win the LOTTERY
LONG LIVE BIG GREEN IRON

peashooter

Great idea thanks for sharing