I have a M923A1 I just got. when I got it, I was told that parts were missing.
I have figured out or replaced the majority of missing parts. Today I found another missing part and can't find it in the manuals. It is electrical, on the firewall inside the cab, to the left of the steering wheel. I can't tell the exact size, but it is 8"s from the floor and about 3" to the rt of the left kick board straight above the dimmer switch on the floor. It is about 2.5"x 5" , has a several prong plug that goes to it and a couple ground wires. Does any one know what this could be? It has 2 screws that hold it in place on the firewall. Not sure what it is but I'M sure I'm going to need it. Please help me figure out what it is.
Thank you
Mark
Mark,
Check out TM 9-2320-272-24P-1, Figure 97, and 97.1. This may be what you're looking for. It shows the canister that 91W350 posted, only looking at it from the inside of the firewall. The part you described is right behind this canister, and it's listed on fig. 97 and description 97.1 and it is indeed the ether canister and associated parts. Hope this helps also.
Jimmy
__________________ On my way back to Shattered Socket Garage... "If I had some 53's I'd put them on my M818 if I had an M818".....me
------------------------------------------------------
Yes guys, it is on the inside of the firewall, the other side of the steering column the brake pedal is on. If my feet were on the floorboard, it would be above my left foot. I am going to take a picture but I don't know how to upload, but I will try.
Flasher unitor highbeam switch, and I 'll bet your head/tail/turn/marker lights dont work, as the big plug hanging down connects to the back of the lighting switch. The smaller 3 wire plug goes to the flasher or highbeam switch. Post the #'s on the wire markers on the wires and we can know for sure.
The Following User Says Thank You to emmado22 For This Useful Post:
What goes here PLEASE
On my way back to Shattered Socket Garage...
