Steel Soldiers::Military Vehicles Supersite
Mark Forums Read

Reload this Page



» Log in
User Name:

Password:

Not a member yet?
Register Now!
» Online Users: 271
69 members and 202 guests
11Echo , 401-J10 , 6x6TRex , 77_Jimmy , 86humv , AC , aiuduin , ak2co , armytruck63 , BigDuck , bshupe , charlietango , chief mark , Clay James , Commander5993 , crasheej , danbrew , DanJP2 , darrenc806 , DaveP , DEMON , dezert ratt , Dieselking22 , dilligaf13 , Draco-87 , ericmichaellawton , farmer73 , fbascou , FORD RECOVERY EXPERT , Fort Powell , fuzzytoaster , gijoe13 , goldneagle , Heath_h49008 , hmfic , hogi , hr37 , IdahoPlowboy , jeepzilla47 , JHM , Jim Perry , JimTheScot989 , JohnDeere , JohnK , m16ty , m38inmaine , MarcS , mdm63 , myJEEPisAfatty , Olywadan , pinzpirate , psolver1 , Smokinyoda , srodocker , Stalwart , standup616 , Stonepicker1 , THE GREEN MACHINE , topo , truck1 , USAFSS-ColdWarrior , usmc deuce cpl , wsucougarx , ZiggyO , Zoyd AT1
Most users ever online was 902, 10-29-2011 at 05:09.
View Single Post
Old 07-25-2006, 18:05   #1 (permalink)
CorneLauwerijssen
Corporal
 
Join Date: Nov 2005
Location: Rucphen
Posts: 31
CorneLauwerijssen
Default bad running engine

I hope some remember my previous posts about this subject.

Well I have cleaned all filterhousings and installed new filters and
there was a small difference.
Last time it started running badly (sounds like its running at 5 cilinders) at around 1500rpms and knew around 1800rpms after the filterchange,
but when I accelerate slow or fast then it sounds normal, not like running at 5 cilinders.

Its running normal between 800 and 1800rpms, may be a little bit unsteady,
hardly noticeble.

But I supose that the Fuelinjectionpump got some dirt inside, it almost must be when you
see how dirty the filters where. How vulnerable are these pump really against dirt
and water, would a tiny drip of dirt or water destroy the pump or makes it just
badly running. Tommorow Iam going to take the fuellines of to see if theres dirt
inside.

At least I have good oilpressure and temperature. The injectors are good too, we
have pressuretested them.

Thanks in advance,

Corné
CorneLauwerijssen is offline   Reply With Quote
 
Powered by vBadvanced CMPS v3.2.2

All times are GMT -4. The time now is 01:55.


Copyright 1999-2012 SteelSoldiers.Com No information or photos to be used without permission.