Steel Soldiers::Military Vehicles Supersite - View Single Post - What's the best way to mount tubeless 2-piece Combat wheels?

Steel Soldiers::Military Vehicles Supersite

Forum Rules

FAQ

» Log in
User Name: Password: Remember Me? Not a member yet? Register Now!

» Online Users: 324
125 members and 199 guests
1943ht , 212sparky , 2buells , 2ndchance , 319 , 41cl8m5 , 73m819 , airbornebandsman , AMGeneral , Angus , antennaclimber , ARYankee , Barrman , baseballump , beltfedonly , bigflew , bmwsyc , bumble900 , Capt.Marion , CARNAC , chevyCUCV , chuck-10 , citizensoldier , Clayshootr , cpf240 , Csm Davis , CycleJay , Danger Ranger , dangerfieldinc , dani2002tii , Dano7216 , DAS , dbwillis , dezert ratt , DieselInfantry711 , dilligaf13 , DRP , DSD277 , Durango_USMC , emmado22 , emoo60 , finnd1 , Fredo Corleone , Garandfan , GerWJ , Goose2448 , gringeltaube , Hal_VT , HanksDeuce , hankstrucks , Healy , hedgehog69 , highfavor1004 , hndrsonj , Hoefler , ICAT , Ironhorse , ivbeenrokd , jeffhuey1n , jks587 , jrobinson5093 , keith648356 , KEKO_ JONES , kennys@wi.rr.com , koolex11 , Lapua Dan , lrayman63 , M1031CMT , M135CDN , m16ty , mactiredearg , Mainsail , mobhs , motomacguyver , mudman , MuskegonBrian , neilhendrix , NEWFDAD , Nicholas , Nonotagain , odnorth , oldmechanic , orey , papabear , pmramsey , pooka , poorman4x4 , rapidins , RAYZER , RECONJON , Recovry4x4 , redneck rebel , Repo3004 , RetiredNavy , rhud33 , rjhiggins , rjinga , roady , rossM4 , RWG , sail-bum , sburns , SCcowgirl80 , SETOYOTA , sigo , Speddmon , Stewie G , The PIG Smith , TIGERFANS2 , tigger , topo , Tow4 , Tweeter166 , UnR00ster , USMC6062 , Vfflang , Welder Sam , wilfreeman , wkbrdngsnw , youngunbd , zeisshensoldt , zyrtecx
Most users ever online was 902, 10-29-2011 at 04:09.

Thread: What's the best way to mount tubeless 2-piece Combat wheels?

View Single Post

10-11-2006, 12:43

#7 (permalink)

dma251

2 Star General

Join Date: Nov 2005

Location: Arlington, Washington

Posts: 650

dma251 is an unknown quantity at this point

RE: What

Well, my wheels are 2 piece, with the outer ring sliding down over the rim like a sleeve. The o-ring sits in a groove, but it's a sideways groove (if that makes sense) and the outer piece sort of rolls over it when you are bolting the wheel together. I just figured that the o-ring might need some lube to protect it and help it seal. I guess I'll just put one together and see how it goes.

All times are GMT -4. The time now is 21:34.