Steel Soldiers::Military Vehicles Supersite - View Single Post

Steel Soldiers::Military Vehicles Supersite

Forum Rules

FAQ

» Log in
User Name: Password: Remember Me? Not a member yet? Register Now!

» Online Users: 340
137 members and 203 guests
1943ht , 212sparky , 2buells , 2ndchance , 319 , 73m819 , airbornebandsman , AMGeneral , Angus , antennaclimber , ARYankee , Barrman , beltfedonly , bigflew , Bill W , BLK HMMWV , bmwsyc , box 5 diesel , bumble900 , Capt.Marion , CARNAC , Cav Trooper , cbvet , chevyCUCV , chris4amd , Clayshootr , connectingbar , corelokt , Csm Davis , CycleJay , Danger Ranger , dangerfieldinc , dani2002tii , Dano7216 , DAS , dbwillis , dezert ratt , Dieselking22 , DRP , DSD277 , Durango_USMC , emmado22 , emoo60 , finnd1 , Garandfan , GerWJ , glcaines , Goose2448 , Greasy , gringeltaube , Hal_VT , HanksDeuce , hankstrucks , Healy , hedgehog69 , highfavor1004 , hndrsonj , Hoefler , ICAT , Ironhorse , Isaac-1 , ivbeenrokd , jeepzilla47 , jks587 , jrobinson5093 , juanprado , keith648356 , KEKO_ JONES , kennys@wi.rr.com , koolex11 , Lapua Dan , lrayman63 , M135CDN , m16ty , Mainsail , Matt65 , Mike O , mobhs , motomacguyver , MT4222 , mudman , MuskegonBrian , neilhendrix , NEWFDAD , Nicholas , Nonotagain , odnorth , oldmechanic , orey , papabear , pctrans , pooka , poorman4x4 , porouspickle , quickfarms , RangerJake72 , rapidins , RAYZER , RECONJON , Recovry4x4 , redneck rebel , RetiredNavy , rhud33 , rjhiggins , rjinga , roady , rossM4 , rtk , RWG , sail-bum , sburns , SCcowgirl80 , Sephirothq , SETOYOTA , sigo , Speddmon , Stewie G , The PIG Smith , TIGERFANS2 , tigger , topo , Tow4 , tstone , Tweeter166 , UnR00ster , USMC6062 , Vfflang , Wagthis , wbdisco , Welder Sam , wilfreeman , wkbrdngsnw , youngunbd , zeisshensoldt
Most users ever online was 902, 10-29-2011 at 04:09.

Thread: throttle position sensor

View Single Post

07-24-2010, 14:44

#5 (permalink)

xenocath

searching.............

Join Date: Mar 2010

Location: Glen allen, VA

Posts: 127

vacuum lines and modulator have been replaced as well as alll metal lines cleaned out with air pressure and carb cleaner truck hits shift points about right and it jerks very slightly so i think i have it dialed in. i was more just curious if adjustment of the vacuum valve (what i thought was tps) would change anything as far as get up and go. i have nobody near as far as i know to check my truck against as far as how they are supposed to run and operate normally. this is my first diesel truck so unsure exactly how its supposed to run and accelerate.

__________________
Buck
86 M1008 a.k.a ODIE
USN VET (GSM)

All times are GMT -4. The time now is 21:39.