just bought a new centerfuge and did a bit of rigging today. 55 high,55 low and the fuge in the center> Wolverine tech looks very nice and home to try it soon.
I've been planning on getting me a centrifuge for some time now because I've got a bunch of WMO (about 350gal) that needs to be filtered. I've thought about building one but I think I just going to break down and buy one. Where did you get your's from?
Just remember that you need a container big enough to hold the amount you have in the feed system. The power went out on me and I found it about 30 minutes later. The 5 gallon jug did not hold the 30 or so I have been feeding it with.
Just remember that you need a container big enough to hold the amount you have in the feed system. The power went out on me and I found it about 30 minutes later. The 5 gallon jug did not hold the 30 or so I have been feeding it with.
That had to have been a mess. Did you happen to grab a pic ?
No pics....too ****ed busy trying to stop the flow with wood ash, rags and what ever was close by. Near as I could guess, there was about 7.5 to 8 gallons all over the shop floor. I really didn't think that there was that much stuff in the way before this happened.
Gunner Bear let us know what you think after you have had a chance to play with it. I'm close to getting one from them.
__________________
James
1 Bobbed 5 ton with lockers in rear and W/W
30 Outher Military Trucks
4 Military Cranes
3 Military semitrailers
2 Military expandable semitrailers
3 military gens. 3k 5k 10k
And storage of to many Military parts that it might be a sin.
new centerfuge setup
