Been looking at dual filter bases for our WMO filtering. The question that I have is how do I tell if they are in series, or parallel, or are they all in series?
I'm finding links to units w/ very little info.
And what would be a good size for the spin on filter mount point, one that would let me use the most common filters.
Thanks all,
__________________
LowTech
Hers
`72 M109A3 - (the "She Beast" a go anywhere Live-In rig)
w/`86 M105A2 - (an alternative-fuel processing station)
`68 M146
`68 M146
`90 M101A2
His
`72 M35A2 - the "little Draggin' "
`87 M105A2 Hardtop - my Camper
`69 M146 - (will be my new studio )
i filter in series. 25 micron, 10 micron, then 5 micron. surpluscenter.com has some nice filters/bae combos. i bought some of the big filters that flow something like 40 or 70 gpm and screw into 1.25" pipe. they work well for me and filters are not that expensive. i took the specs of the filters (dimensions) and cross referenced it to a napa filter and thats where i bought my 5 micron filter. i've filtered a lot of oil and have not had to replace a filter yet.
__________________
Tom
Its not what you buy, its what you build.
Growing old is mandatory, growing up is optional.
I never had so much fun going so slow.
1972 M35A2 W/W
1968 M109A3 W/O W
M105A2
M200A1
1984 Libby MEP-002A
1940 Ford Pickup Street Rod
1923 Ford T-Bucket
2000 Jeep Cherokee with 6.5' Western Unimount
2003 Yamaha V-Star 1100 Custom (deer slayer)
The Following User Says Thank You to Wildchild467 For This Useful Post:
Dual filter base
a go anywhere Live-In rig) 
