M35A2-AZ

I almost got my WMO filter system competed.
The pump and one filter elements I got from Kipman.
I test ran the pump with a drill motor and it worked great, I got 5 gals. of filtered wmo in no time at all.

Just need to find some way to power the pump. The pump has a 5\8" 9 spline shaft on it.
Has anyone found something to use with the 5/8" shaft?

Attached Images

	100_6540.jpg (78.6 KB, 118 views)
	100_6541.jpg (84.6 KB, 63 views)

__________________
71 M35A2 w/w
85 M923A1
86 M931A1
69 M35A2 wo/w
71 M35A2 w/w
M332
M105a2
M105a2 for sale

frodobaggins

Can you give a little more info on exactly what we are looking at ?

__________________
M35A2 WO/W + Winch
M35A2 WO/W
XM105E3
M105A2
M105A2
M101A1
M200 w/5th wheel (trailer dolly)
M750 ("The Poop Deck")
M796 Bolster Trailer
M796A1 Bolster Trailer
M353 Generator Trailer
ɹəʌəɟ po əʌɐɥ ı

M35A2-AZ

Frodobaggins, I guess I need something that can fit the spline and then maybe I can put a pulley on it. Not sure what I need for a drive system.

I did have a peace of hose and a hose clamp that I used to test it with a drill motor. But I do not think the drill would last long.

Thanks!!

__________________
71 M35A2 w/w
85 M923A1
86 M931A1
69 M35A2 wo/w
71 M35A2 w/w
M332
M105a2
M105a2 for sale

mikey

Nice setup. Smart move putting pressure gauges before and after the filters.

__________________
67 M35A2 W/W
71 M35A2 WO/W

I love Shenkmen's meat!

frodobaggins

I'm sorry I didn't explain properly. I meant could you explain the system a little bit better. I'm still chewing on your shaft problem, which I DID understand

__________________
M35A2 WO/W + Winch
M35A2 WO/W
XM105E3
M105A2
M105A2
M101A1
M200 w/5th wheel (trailer dolly)
M750 ("The Poop Deck")
M796 Bolster Trailer
M796A1 Bolster Trailer
M353 Generator Trailer
ɹəʌəɟ po əʌɐɥ ı

M35A2-AZ

I understand now!!
The first filter is a 30 micron, 2nd is a 10 micron water sep. and the 3rd is a 2 micron.
See that what you are asking?

__________________
71 M35A2 w/w
85 M923A1
86 M931A1
69 M35A2 wo/w
71 M35A2 w/w
M332
M105a2
M105a2 for sale

M35A2-AZ

I got the idea from some threads here on SS. Thanks!

__________________
71 M35A2 w/w
85 M923A1
86 M931A1
69 M35A2 wo/w
71 M35A2 w/w
M332
M105a2
M105a2 for sale

TexAndy

What filters are those? What micron rating?

I'm kind of going back and forth on whether to go with a filter setup or shell out for a centrifuge.

M35A2-AZ

The first filter (Left side) is a 30 micron, I got the housing from Lowe's and the filter from SS Kipman. He had the filters for a $1ea
The 2nd is a 10 or 16 micron water sep.(same as wix 24027) and the 3rd is a 2 micron (napa 3674 or wix 33674)

I was thinking about the centrifuge also, but for the cost right now I think the filters will do me for a little bit tell I start driving the trucks a lot more.

__________________
71 M35A2 w/w
85 M923A1
86 M931A1
69 M35A2 wo/w
71 M35A2 w/w
M332
M105a2
M105a2 for sale

patracy

If the OD of the splined shaft is 5/8", just pick up a pulley or a lovejoy coupler to connect it to an electric motor.

__________________
http://www.militaryoffroadtires.net for all your tire needs!
1969 M35A2 wo/w, hoist in bed, heater, Ooga horn, Recentered HEMTTs and 395's, "Candy Smasher"
1984 M35A2 wo/w, bobber the "Black Pearl"
1968 M543A2 Wrecker
1985 M1008 - SMOKEY 8" lift, 36" humvee wheels/tires, turbocharged.
And a few M105 and M101 trailers
M792 Gama Goat Ambulance - Transported from the CAMO compound.