I can only go by what I've done, no reason to guess.
I used gas for a summer since it was much cheaper than diesel. Every time I used it, the mixture near the top was much thinner than the mixture toward the bottom. Barrman noticed this too. I have since moved to using diesel or transformer oil to thin my WMO. Also, I have found a source for hydraulic oil in a good supply and have not used much WMO for the last year.
I can only go by what I've done, no reason to guess.
I used gas for a summer since it was much cheaper than diesel. Every time I used it, the mixture near the top was much thinner than the mixture toward the bottom. Barrman noticed this too. I have since moved to using diesel or transformer oil to thin my WMO. Also, I have found a source for hydraulic oil in a good supply and have not used much WMO for the last year.
do you thin the hyd oil or run straight? i will be able to start getting used oil from work starting next week and would like to know how it runs on it and if it need thinning thanks
__________________
96 GMC C2500 5.9 Cummins
71 Chevy C10 Turbo 5.3 (under construction)
67 Kaiser Jeep M35A2 Bobbed on 14.00r20s
M105A2 (cut up for bob)
