bring um. you won't have any trouble getting rid of them.
I just want to make sure I keep the right three for me.......I plan on installing the ring mount on my next Bobber.
One of them has the clip to hold the muzzle of Ma Deuce....I know it's a keeper and I have two of the ammo box holders and one of the trays that hold the ammo belt down.
I may bring them all and let someone help me out sort them out there.
__________________
My karma ran over your dogma.
Wreckerman's rules of the road (and living in general)
The first picture is the right rear,the middle picture looks like the left rear,the last is right front.You have 1 right rear,3 left rear and 2 right front.
__________________
Dwight
1971 AM General M35A2 W/Winch
1986 Turtle Mountian M105A2 Trailer
1983 Parkhurst M105A2 Trailer
the first picture looks like a rider,s side back leg if it is long by the way the channel is turned.
the three in the middle picture look like driver side by the way the channel is turned but
one looks like it has been cut off.
the last picture looks like front legs if they are shorter than the long ones.
i didn,t have the proper back legs for my mount i used a rear riders side leg on the left side
but no one has ever brought it up works for me.
The easiest way to tell when someone has a complete set of legs is that all three legs are different. The right and left are straight and the front is not. I only saw one plate for the drivers side. However, it is very easy to duplicate an existing plate.
__________________
Gary
US Army 1970-1971 MOS: 11D20
USAR 1972-1973
MVPA: #32652
1998 AM General M35A3 W/W M66 Gun Ring
1969 Kaiser Jeep M35A2 W/W
2000 M149A2 (USMC) Water Buffalo
1968 Johnson M105A2
1992 M116A2 Trailer Mounted MEP-003A Gen Set
30D36R 3 KW Gen Set ex-NC ANG