hello i am a military vehicle collector...i have recently bought at auction two gens a mep017 and mep003 i have the manuals....but i will need help with gen.problems questions
1 all fuel hoses need replacement......will upbraided auto fuel line work just as good
2 on the mep017 with a bad engine battery VR...cause no voltage being applied to the main gen VR.. on the line connections input 1 and 2 on the old style main gen VR...what would cause no input voltage to the main VR
3 what would be the voltage reading on the main gen. VR six pins
4 ...besides new ,,fuel lines ,,,filters ,,,oil change ,,and manuals and no idling the gen..what else should i do to make the first run
Fuel lines good for gasoline are good for diesel. Pressure is under 10 PSI on these lines.
On the voltage regulator issue, field flashing is not normally required, unlike the 002/003A series because the 017 operates at 3600 RPM and USUALLY residual magnetism is sufficient to "bootstrap" the main field.
my 003 had several fuel lines and filter cans missing. got the fuel lines used fron delks for $15.00 a piece. on my 017 i changed all the fuel lines to rubber hose and changed the fittings to brass barbs made it alot easier. have you tried the manual feild flash switch inside left contol panel? on my 017s and 018 all needed fuel pumps, points,plugs and carbs.
mep003...mep017 fuel lines
