I've found it before, but can't seem to find it again. Need to find TM section with allowable rod bearing clearances etc. for LDT 465-1-c, 6/85 manuf. date.
Thanks,
BC
__________________
1970 M35a2 W/W Whistler Turbo NH Antique Tag MCB6
72 Triumph 650
1984 22' Sisu Lobster style cruiser 165HP 229CID Crusader
PETA=People Eating Tasty Animals
"Complexity is easy to create; simplicity is difficult."
The gene pool could use a little chlorine.
SS Member 1493
Further info if needed:
Maximum running clearance for rods: .0065
Main bearing maximum allowable clearance: .0068
Main bolt torque: 135 to 140 ft/lb
Connecting rod torque: 115 to 120 ft/lb
Crankshaft end play: .010-.014 max allowable .018
Main journal and crankpin out of round or taper: .0005 max.
Connecting rod side play: .007-.013
Flywheel capscrew torque: 115-120 ft/lb
Regards Marti
__________________
Warsaw, Indiana
3 M-880 Pickups
2 M-200 Trailers
3 M-105 Trailers
2 M35A2 Deuces
1 M-139 5 Ton Bridge Truck
1 M-543A2 5 Ton Wrecker
2 M-51A2 5 Ton Dump Trucks
1 M-52A2 5 Ton Tractor
3 M-135/ M-211 Deuces
1 IHC T-9 SeaBees Dozer
1 M-313 Shop Van
1 M-689 Shelter Dolly Set
1 M-715 1964 Jeep
Thanks much Marti,
Where the heck did that info come from; which TM if I may ask.
BC
__________________
1970 M35a2 W/W Whistler Turbo NH Antique Tag MCB6
72 Triumph 650
1984 22' Sisu Lobster style cruiser 165HP 229CID Crusader
PETA=People Eating Tasty Animals
"Complexity is easy to create; simplicity is difficult."
The gene pool could use a little chlorine.
SS Member 1493
The motors were built by White, who also put them in the 2-135 and 2-155 farm tractors. We have always used the Implement & Tractor manual for the rebuild information for all of the engines in our trucks regardless of the maker or year. We have torn down, checked and re-assembled or rebuilt several motors with these specs with excellent success. The military sends the same specs of these kind to all makers so they do not have parts interchangeability problems.
By the way, if you find one of these tractors in a salvage yard, you can take the oil filter assembly off the motor and put it on yours, giving you the spin-on filters. We typically pay about $60 for the assembly less the oil cooler.
Regards Marti
__________________
Warsaw, Indiana
3 M-880 Pickups
2 M-200 Trailers
3 M-105 Trailers
2 M35A2 Deuces
1 M-139 5 Ton Bridge Truck
1 M-543A2 5 Ton Wrecker
2 M-51A2 5 Ton Dump Trucks
1 M-52A2 5 Ton Tractor
3 M-135/ M-211 Deuces
1 IHC T-9 SeaBees Dozer
1 M-313 Shop Van
1 M-689 Shelter Dolly Set
1 M-715 1964 Jeep
__________________
1970 M35a2 W/W Whistler Turbo NH Antique Tag MCB6
72 Triumph 650
1984 22' Sisu Lobster style cruiser 165HP 229CID Crusader
PETA=People Eating Tasty Animals
"Complexity is easy to create; simplicity is difficult."
The gene pool could use a little chlorine.
SS Member 1493
Rod bearing TM help please
