Hey guys,
I know this should be in the classifieds, mods feel free to delete if you like. I just wanted to take this opportunity to see if any members wanted some of this stuff before it hits the scrap yard.
I have about 16 Front splashguards for the M109a3 trucks. I have absolutely no use for them and I am going to scrap them probably the beginning of next week (8/10/09), but I hate to see good OD Iron parts hit the scrap yard when someone on here can use it. If anybody want's any they are $10 plus shipping. They are new in the boxes.
I also have about 50 seat pedestals that from what I can tell fit the M939 series trucks, same deal, I have no use for them, anybody wants them or knows someone who does PM me or they are getting scrapped. Same price $10 plus shipping. These are also brand new in the boxes.
Also have 2 rims, that I have no idea what they fit, they are 20" rims with no centers, brand new in the boxes. $20 each takes them, but they will have to be picked up locally or I can deliver within a reasonable distance for the price of gas money because they are heavy.
Like I said, I know this should be in the classified section, but if nobody wants any of this stuff it's going to the scrap yard in a week and I just hate to see good new stuff get scrapped if someone can use it, or needs it.
Thanks. Here are some pics for ya'll.
Even a blind squirrel finds an acorn every now and then!
1970 M35A2 "The Stone Wagon"
1969 Lube and Servicing trailer
MEP-003a 3000 hrs
MEP-003a 1500 hrs
So, uh.....whats the difference between those splash guards and the ones on a regular deuce??
Proud to own Builder77's former ride. R.I.P. Ethan
1970 M35A2C with hardtop and heater, no winch. Limited duty due to uh......something..TDB
Studebaker M108- home- runs, resto pending.
Studebaker M35A1 with plow and LDS 427
Avatar= Pic taken minutes after landing from first SOLO
flight.
NEWEST ADDITION: 1990 Human female AKA "Salafrae" More options that i know what to do with. Awaiting transport to home base. http://www.steelsoldiers.com/members/salafrae.html
scooter,
the "V" bend in the guard going down the middle for one thing...the deuce has two bends each about a third of the way in. And the sides of these guards have a bend of about an inch on each side, where the deuce is just flat steel.
Recovry,
The measurements on those seat pedestals is about 24 3/8" long, 6 1/4" wide, by 2" deep. The welded female threaded stud is about 3 1/4" from the open end. See the pictures, if you need more measurements or info let me know.
Even a blind squirrel finds an acorn every now and then!
1970 M35A2 "The Stone Wagon"
1969 Lube and Servicing trailer
MEP-003a 3000 hrs
MEP-003a 1500 hrs
Ah, thanks. Don't happen to have the deuce handy to go look at.
Proud to own Builder77's former ride. R.I.P. Ethan
1970 M35A2C with hardtop and heater, no winch. Limited duty due to uh......something..TDB
Studebaker M108- home- runs, resto pending.
Studebaker M35A1 with plow and LDS 427
Avatar= Pic taken minutes after landing from first SOLO
flight.
NEWEST ADDITION: 1990 Human female AKA "Salafrae" More options that i know what to do with. Awaiting transport to home base. http://www.steelsoldiers.com/members/salafrae.html
yeah, I read about your head gasket problem, sorry to hear that. I had to go check mine just to be sure of the differences myself. It would be nice if I could make use of some of them myself, it might turn this otherwise horrible day into something worthwhile.
Even a blind squirrel finds an acorn every now and then!
1970 M35A2 "The Stone Wagon"
1969 Lube and Servicing trailer
MEP-003a 3000 hrs
MEP-003a 1500 hrs
M109A3 Splashgaurds...Cheap
