Search:

Actually M35 is the cargo gasser with a 331 REO/Continental engine with non overdrive transmission.M35A1 is the first Milti with the LDS-427 engine.M35A2 is the LD465 (non-turbo) or LDT 465 (turbo)...

I saw this happen once with a M35A2. The transfer case had been filled level with the fill plug when cold. After driving, the fluid got hot and expanded. The exhaust side tube of the air switch...

Yes, it is. It's something we'll eval/implement later on.

And before you go any further. Forums are social networks. Facebook/Myspace/exc grew out of forums. Forums grew out of bulletin boards.

Looks a heck of a lot better than mine when I started on it. I think this one is a '67 from the registration number on the dash. The silicone brake fluid sticker on the dash tells me the Army was...

12V lighting. If you follow the wires from the mil-plug you see where they tie into the stock wiring harness.

You can get those neat Tee fittings that will connect at the stock taillight harness...

http://www.steelsoldiers.com/deuce/40509-long-vs-short-airpack-pics.html

Try a search for "air pack long short". There are several good threads discussiing the two versions.

I tried searching...

The new style booster is a direct bolt on replacement, no modifications needed.

General Rules

SteelSoldiers.Com Website Rules and Regulations

Welcome to...

Check with truck brokers in your area and see if you can find a step deck that needs a back haul back to your area.

Awesome pictures; would be better if everyone stated where the pics where taken; i.e. GA Rally etc.
This would help identify some of the trails where the pics where taken for those of us that do not...

It's under the search dropdown in the navbar now.

On the whiteboard

Would it be at all possible to implement a Google Custom search (http://www.google.com/sitesearch/) on the website to take the place of the current search function?

EDIT: using a google search...

Lights on FYI

If your having trouble with your blinkers, all of them, you may have a bad flasher unit.

The TM that ends in -10 is the basic operators manual.

The TM that ends in -20 is for intermediate...

One problem at a time, one day at a time. I agree, it can be "overwhelming" if looked at all at once, but it doesn't go that way. Fix what is broken, with help from here and the TM's, and go back and...

To mark the 10th Anniversary of September 11th, several pastors in the area have organized a day of Prayer and Remembrance for Patriot Day. What first started as just a day to get local churches...

WHEW! :beer: well it is one thread i read thru, Glad the guy here is man enough to take it, maybe will want to give it one day, he earned it !! :beer: Well if one can not take the heat , yep, stay...

Will mount under the bonnet(hood) I have mine there on the offside. (passenger side). on all my trucks. (well two actually one each side.on the wrecker. and 5 ton.) (and) plenty of sound escapes as...

I picked up a new 3" 8-pt socket at a used tool place for something like $15. Decent-sized wheel/truck/trailer supply houses also carry 'em for substantially more. Keys in this regard are: 8...

←was done woth a stencil frm airbrushingstencils.com or the ebay store "gt coatings". Rob suggested the adhesive. Hobby lobby and micheals carry it and its a breeze to use.
Ur bumper markings look...

I have used regular contact cement spray to stick down stencils and power washed it off when the paint was dry. Currently I have vinyl decals printed at the local sign shop. All of the markings on my...

If i may offer this, ya get nice crisp lines from stencils if ya use "stencil adhesive". Available from ur local hobby shop. I love it! Like what you've done too!

This is a great summary put together by Sport Truck magazine...

During the course of our in-depth research, we found that no two states are alike, with regard to enforcing equipment and...

I despise harbor freight, buy the real thing, support american businesses and workers, get something you can count on, and be PROUD of it. Buying cheap throw away things is part of the reason america...

If anyone in NE PA or W NY or N NJ is looking for totes I found a place that has them.. washed with lids and valves.

Dixon Sealers in Scranton PA has them for $99 each. I just got two and he had...

'You can catch more flies with honey than with vinegar'

you can use this vacuum pump that runs off compressed air

Air Vacuum Pump with R134A and R12 Connectors

I've successfully gotten 24" mercury using this setup and a weak home compressor.

The classified ad thing gets asked almost daily and those of us that are on here daily get tired of seeing the same thing asked over and over again, and your right about some being quick to be a...

This is not exactly great pics., but it may give the idea.
Bottom sockets are made from some Commercial Equipment legs. They have a 1/2" stud both inside and out. I removed the actual insert from...

3' x 5' flags.
Check this out, there are several more threads like it.
http://www.steelsoldiers.com/deuce/43220-proper-display-us-flag-my-deuce-veterans-day-parade.html

I don't think it can get any prettier than this picture!!

Yes, and no.

If all wheels have traction with the ground, then it is safe to shift into AWD at any speed.

If the rear wheels are spinning due to lack of traction, and the front wheels are...

I knew ppl would want part numbers I forgot to include them
I got everything from advance auto parts.

4prong plug #48110 $8.00
lamp socket #85820 $5.00 X2
Roll of trailer wire #49915...

ok... its time to move on.... It is what it is. There was no huge harm done. You are doing harm by bitching about it and making a larger stink that is needed. Log off and go to bed. Time to cool off...

Some of you guys need to get a life. The guy helped out a fellow SSer who needed the trailer.

Nothing wrong with that. These guys who ask questions about the classified are not anywhere near as...

I have a State Farm commercial policy on mine. If you want to participate in parades, make danged sure you ask the underwriter for State Farm if they cover parades. That is the only thing they would...

:deadhorse:

This is a master list of different receiver hitches installed on M35s.

There are dozens of designs, so go through them, see what you like, and take your project to the next step!

All I did...

After reading all the issues relating to the use, misuse, and lack of use as well as my personal experiences with the "search" I thought I'd start a thread to offer tips and advice to users, new and...

Yeah Bob, that Aircraft streamer adds a certain "class" to the stack cap!!!!!!

I would say that you are not truly initiated into this hobby until you have had a "Stack Bath" of black, sooty,...

I was scheduled to pickup some stuff and do some previews Friday morning in Huntsville. The bad weather must have pasted the base because I get no answer at GL up there.

If you have an...

Maybe some version (brand you like) of this. Keeps the water and birds out and no rattle like the caps.

Go ahead, thats why I put it here. Ive gotten so much help from the forums here, I figured I would attempt to return the favor.

IMHO, I wouldn't do business with someone like that.

It's true, militia has nothing to do with it. We are basically an old car club.

...or a plate or stencil with SS and the two letter state initials you're from. Example SSAL (Steel Soldiers Alabama), SSFL (ss Florida) SSTX (ss Texas) ... you get the point, maybe stencil screen...

I would suggest cracking the brake line that is the output of the master first and if the brales release it is the master. If you do that and nothing happens, then it is probably in the airpack. You...

So as many of you know... As a side job I clean, sell and deliver plastic barrels for wmo collection etc.
Today I decided to make a quick tutorial on zero-cost homemade stencils using my collection...

a well ventilated block and a towing bill

Your truck = your choices