Its quite obvious that the gearing on the m715 is very tall... and this can be compensated for with taller tires, and an overdrive transmission.... Has anyone installed a second transfer case in order to act as a 2 speed rear end? The arrangement would be as
Engine-Tranny- trans case 1 (with front drive shaft going forward to front axle/rear drive going to next transfer case which would control the high/low range) - differential....
Obviously you couldnt run 4wd with the second transfer case not with 1:1... Any write-ups from 4wd discussions etc would be great... most things ive found are so you can go with ridic crawler setup and large tires... I would want tor etain the normal driving of the current 4.89/5.68, and then be able to have a highway range... especially with a diesel conversion in the works (lack of high RPM availability).
post pics/decriptions if you have them