filter specs

I had contacted some manufacturers of filters I use. I am posting in case it might help anyone.

Hastings filters FF906 and FF973 are 4 micron nominal and 15 micron absolute. Those are the primary and secondary filters for stock deuces.

I have also used Fleetguard FS1000 and FF211.

This is the specs I got from Cummins on the FS1000:
FILTRATION, MECHANICAL SPECIFICATIONS AND TEST STANDARDS



CAPACITY 72 g CECO ES14225

TERMINAL DP 7.97 in Hg

RATED FLOW 89.83 GPH

CLEAN ELEMENT DP, MAX 1 in Hg CECO ES14225

EFFICIENCY, TWA BY SAE J 1985 98.7 % SAE J1985

MICRON RATING BY SAE J 1985 10 micron SAE J1985

EFFICIENCY, TWA @ 2ND POINT BY 83 % SAE J1985

SAE J 1985

MICRON SIZE @ 2ND POINT BY 5 micron SAE J1985

SAE J 1985

EMULSIFIED WATER SEPARATION 95 % SAE J1488

FREE WATER SEPARATION 95 % SAE J1839

ELEMENT COLLAPSE/BURST, MIN 39.88 PSI CECO ES14225

HYDROSTATIC BURST, MIN 203.05 PSI ISO 4548-6

HYDR. PULSE DURABILITY, MIN 41000 Cycles CECO ES14225

AT HIGH PRESSURE 101.52 PSI

AT PULSE FREQUENCY 4 Hz



SINUSOIDAL VIBRATION, MIN 1000000 Cycles CECO ES14225

AT ACCELERATION 5.1 G's

HIGH TEMP 250 F°

LOW TEMP -45 F°

This is for the FF211:
FILTRATION, MECHANICAL SPECIFICATIONS AND TEST STANDARDS



CAPACITY 52 g SAE J905

TERMINAL DP 7.97 in Hg

RATED FLOW 120.21 GPH

CLEAN ELEMENT DP, MAX 1.48 in Hg SAE J905

EFFICIENCY, TWA BY SAE J 1985 97 % SAE J1985

MICRON RATING BY SAE J 1985 8 micron SAE J1985

EFFICIENCY, TWA @ 2ND POINT BY 90.4 % SAE J1985

SAE J 1985

MICRON SIZE @ 2ND POINT BY 5 micron SAE J1985

SAE J 1985

ELEMENT COLLAPSE/BURST, MIN 79.77 PSI ISO 4020/1

HYDROSTATIC BURST, MIN 203.05 PSI ISO 4548-6

HYDR. PULSE DURABILITY, MIN 50000 Cycles ISO 4548-5

AT HIGH PRESSURE 101.52 PSI

SINUSOIDAL VIBRATION, MIN 10000000 Cycles ISO 4548-7







AT ACCELERATION 5.1 G's

HIGH TEMP 250 F°

LOW TEMP -45 F°

Thanks for posting. Filter specs are not always easy to find.

These are just the ones I have been useing. In contacting customer service at most filter companys, I have been emailed LOTS of specs. I mistakenly deleted the info I got from Baldwin.