• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Pilot bearing / bushing needed

sermis

Active member
1,844
17
38
Location
Temple, TX
I started the 6.2 swap into my M725. When I pulled the SBC 350 out I noticed that the pilot bearing had a lot of wear. The shaft on the T98 looks ok. The pilot bearing I had was from Novak. I called Novak and they would not give me a civi part number or size measurements. They will sell me one but I have to wait on shipping. Does anyone know of a pilot bearing / bushing that will work? GM OD / Jeep T98
 

Wolf.Dose

Active member
1,062
9
38
Location
Boehl-Iggelheim, Germany
There is a metric needle bearing without inner ring available that fits on the trans shaft. The difference to the drill in the fly wheel must be covered by a home made bushing. It works. I use it.
Wolf
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks