stock front flange bolt length?

what's the exact length/pitch of the 8 bolts that hold the front drive flange? I need to know so I know how short to make the bolts for my flanges

I'm just bumping this up in case anybody missed it I pick my deuce up Oct. 29th and hope to pop the flanges right on. If anybody knows the length, great. Otherwise, I'll go 1/2" coarse, 3/4 or 1" long to be safe.

Are you talking about the bolts on the front wheel hubs, where you would put lock-out lock-in hubs???<img src="emoticons/icon_smile_wink.gif" alt="Wink">

Originally posted by Loose Deuce

Are you talking about the bolts on the front wheel hubs, where you would put lock-out lock-in hubs???<img src="emoticons/icon_smile_wink.gif" alt="Wink">

Click to expand...

yup, sorry- the bolts holding the front flange on, the 8 1/2" bolts. My new flange is 1/4" so I'll need shorter than stock but I don't know the stock length, thanks!

Man, I keep forgetting about this every day, so I just went outside and got one. its 1-3/4" long from the underside of the head to the end. Std. coarse threads. looks like a 7/16" bolt with the threads coming up about half way on the bolt. I can email you a picture if you send me your email address.

1/2 x 13 tpi. 1.75" length