Need Valve lash measurements HELP !

Hello,

I have borrowed my buddy's mule ( for Tower Park ) and I need to adjust the noisy valves, can one of you please provide me the clearance for the intake & exhaust ? also I need to know if it is a HOT or Cold adjustment.

It is a 1968 M274-a5 Baifield w/ AO-42 2 cylinder engine

Thanks in advance !!!

Eric..

Isn't it on the top of the engine, on a data plate?

If I recall mine was marked on the valve cover, may be hidden by thick paint.

call bill watson.

http://www.m274mule.com/home.html

Might your Noisy lifter sound be the Magneto? it is loud sounding Klack..
Hydrolic lifters.. and the head i just installed was 100% drop on no adjustments on the rocker arm assy..torque to spec... ... check timeing...drive on..

Thanks for the replies, I did pull the covers and it does have HYD lifters. The MAG is quiet so I guess we'll run it as is and see what gives someday, then overhaul time

Cheers, Eric..