• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

4L80E shifter assembly wiring help please

USCDOC

New member
21
7
3
Location
CA
I see 5 wires that exit the shifter. I am changing it for a 3L 80 shifter because I’m doing a 700R4 conversion. Three of the five wires fit perfect and match up to number stamps, but the other two I’m not sure what they go to. Can anybody help with this? Thank you!
 

BLK HMMWV

Well-known member
1,506
393
83
Location
Pasadena California
Perhaps if you told us what year and what engine / transmission was in the vehicle originally it might help.
Also if you gave us the #'s you can identify it would help by elimination .
What shifter are you removing ? a 4 speed?
there will be a neutral safety switch, possibly even a switch for reverse lights.
All depends upon the wiring harness used in the truck
 

USCDOC

New member
21
7
3
Location
CA
So apparently one is for the back light, and the other for the Park safety switch. The unit did not come with a reverse switch
 

papakb

Well-known member
2,288
1,185
113
Location
San Jose, Ca
Here are the 5 wires coming out of the shifter boot:

Wire #467 Backup Light switch
Backup Light Switch #467.png

Wire #14 Neutral Safety Switch Neutral Safety Switch #14.png

Wire # 40 Shifter Legend Shifter Legend #40.png
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks