Need water pump mounting plate gasket for MEP-802A

Hi,

I'm looking for a source for the gasket that goes between the water pump mounting plate and the block.

Also, if I can get them, I'd like to replace the sleeve and preformed packings that go between the block and the water pump.

Anybody know where I can get these?

you can get them from a cummins dealer that deals in generators thats where i got mine

I believe everything also comes in the complete gasket kits available for like $80 on ebay if you search by engine.
Also, The preformed gaskets on the tube are just o-rings.

Appears the price has gone up, but $140 for a complete genuine Cummins gasket set doesn't seem like that bad of a deal. I'm going to pick one up. Thanks for the help.

That's a very good price for a real Cummins kit. The knock-off kits actually came down to $66 now!

Does anyone know the kit number from Cummins or what to ask for? ......Or the knock of kit from Ebay? I tried using Right stuff gasket maker on the mounting plate and it's leaking from the mounting plate studs (17) on attached parts breakdown.

I'm looking for Items 12, 13, 14 and 16.

Thanks

For the 4 cyl. the kit is 657-34281 or search for LPW4 or DN4M gasket kit, for $77
For a 2 cyl. ( different head gasket and side cover gasket ) you just have to search for DN2M or LPW2 gasket kit. it's $150 now.

Ray70 said:

For the 4 cyl. the kit is 657-34281 or search for LPW4 or DN4M gasket kit, for $77
For a 2 cyl. ( different head gasket and side cover gasket ) you just have to search for DN2M or LPW2 gasket kit. it's $150 now.

Click to expand...

Thanks!