Search results

Well it is still in the same spot. I am now ready to move it ASAP if I can find someone to help. I have the road transport truck lined up i just need to find someone that can either move it to the road or hook to the front of the road truck with something large enough to matter and has all wheel...

Greetings all.... (again).. After many false starts I am finally able to say I have a date for this move. Anytime after December 22, and the sooner after that date the better. I have access to a road tractor/trailer if needed so at a minimum I just need to get the container to the road. As a...

I didn't pull it out to see if there are more stickers that might better identify it. I can if needed.

10-4! CO, heat and smoke with local and remote (inside the house) monitoring. Also considering an installed fire suppression system with some kind of emergency shut down when heat or smoke alarm goes off, a few minutes delay on the CO shutdown. I was going to ask about how to connect the...

Will do! The gen is temporarily being stored not where I am but I will be close to it tomorrow, I'll try to get to it and get the battery info for you.

Just got it night before last. Brought it home and played with it some. This is my first item bought direct from the auction. (Buyng from the auction was no problem, Picking up from the auction is another story that I'll tell later) 3 questions for now. 1) It came with a battery. There is a...

I know it is not a decal but more of a plaque. But whatever you call it mine is so faded I can't read much of anything on it. Are replacements available?

I was fairly sure this was not factory exhaust but it looked pretty decent. Is this ok or do i need to put flex right at the first 90? Or? (I want to make sure whatever I end up with does not in anyway cause damage to the machine. I much prefer to get it right in the first place than to have to...

Sweet! 6' lift is almost enough to stack them!! I'm going to TRY to send you a PM with my direct contact info.

I guess I should have specified that the exhaust will be pumped outside and I was seriously considering an outside air intake port as well. That said, thanks for the advice about supporting the weight of the piping. Could someone possibly provide.me a pic of what the factory exhaust looks like...

"If it works" is usually one of my general policies. However, since I was unaware of the already in place cooler and mindful that the ambient temp in the box may likely be at least a bit more than true outside ambient temp I was looking for a way to possibly compensate, I mean the cooler (to a...

Actually I did NOT know there was already an oil cooler in place, good to know! (I just bought it a week ago and am still learning about it). CFM calculation is an excellent idea and the kind of thing I normally would have already thought of but had not gotten there...yet?! I'll absolutely do...

No deadline. Trying to arrange to get it done maybe September? Give or take a month? Your plan sounds workable! I looked up the m1022a1. It looks like it is a wheel set made spefifically to move these boxes. Is that correct? Is the winch on the front of the tractor or on the catwalk?

So I have a 003 and it is going to be placed in a storm proof reinforced shipping container as a "Generator house". It will have both an intake and exhaust fan to move the hot air from the inside of the container so hopefully the internal temp will be only slightly more than the ambient external...

I can get a regular road tractor and trailer to go get it but once loaded I'm sure it will get stuck. Maybe someone has a 6x6 tractor that once the trailer is loaded could then hook to the trailer and get it up to the road?

Anybody have any new ideas?

That link was VERY INFORMATIVE.! It should be required reading for anyone thinking about attempting to store diesel fuel for any pronged period. Thanks much for the link!

Unfortunately it looks like that link no longer works...

This may not be the correct forum, if not, please let me know where to best post this. I have a 40' sea shipping container (Conex) filled with personal household stuff. It is sitting in a field which is now mostly loose sand (NOT MUD) and any conventional truck is absolutely going to get stuck...

Hi All. I have located and will be going to get tomorrow a MEP-003A. Questions for you: A) Has anyone used this: Inova MEP "Auto Start Kit" does it work? Is it safe and will it in anyway harm the unit? B) If I set up and run the unit and adjust the voltage and MHZ then shut it down and set...