Search results

  1. L

    Diagnosing CTIS M1078

    Well, I changed out my seals on Left Front Hub, reinstalled, tested, found a crack in the metal line from hub to Hollow Lug Stud, brazed repaired, and tested again. System held air. Reassembled for Test Ride. CTIS acted differently. The barking of the Quick Release Valves definitely diminished...
  2. L

    Diagnosing CTIS M1078

    Call this space Computer Ineptness ie dangerous with the keys.
  3. L

    Diagnosing CTIS M1078

    I got back to the issue of the leak on front left hub. I procedurally disassembled the tire, drum, removed the planetarium, and pulled the hub. No big deal except one. I have not read the manual but I need to and that is in regard to pulling the rear seal. Seems as if the spindle is larger than...
  4. L

    Diagnosing CTIS M1078

    Thank you. When I get back to it and reseal that hub I will continue on the quest. Until a later date. Lugnuts
  5. L

    Diagnosing CTIS M1078

    Just catching up on what has evolved thus far: First I filled the air tanks and found the air switch that signifies to the CTIS controller that air pressure has been obtained is working. Secondly, I performed the test mentioned earlier in this article to see if my manifold was working and where...
  6. L

    Diagnosing CTIS M1078

    Thank you. Just two question, what are you calling the modulator valve and what is the location of said valve. Lugnuts
  7. L

    Diagnosing CTIS M1078

    Sounds like the smiley face is the voice of experience. Thanks again
  8. L

    Diagnosing CTIS M1078

    You the man!!! This is one of those posts that will be around to help others for a long time. Thank you greatly and I'll let you know how this turns out. I figure if I put charged air line from my shop compressor into one of the drains on the wet tank I should be able to work without noise and...
  9. L

    Diagnosing CTIS M1078

    Looking again for the assistance and guidance of Ronmar Sir, here is where I am. The first thing I proceeded with was to clean my wheel valves and as figured they were very crusty. I removed the supply air line from the wheel, cleaned the valve, and then filled the tire with air to 65 psi, and...
  10. L

    Diagnosing CTIS M1078

    Thanks again. I will let you know how this turns out or diagnoses anyway. Most likely I'll have more questions Have a great week end. Lugnuts
  11. L

    Diagnosing CTIS M1078

    Ronmar Thank you for the skinny on the unit. I think you have given me a place to really start diagnostics. I know that I have bad valves at the wheels, the ones right before the Schrader Valves. My tires are pretty much flat and when inflated to correct pressures it is 3 days and they are flat...
  12. L

    Diagnosing CTIS M1078

    Yes, I have downloaded the Tech Manual and thank you for sharing that. My question and I haven't found it in the site is that pertaining to Software for Computer diagnostics of the system. Is it obtainable? And where might it be located? And has any person on this site done it and know it? I...
  13. L

    Power Distribution Panel M1083A1 10/98

    I made a video of how I am diagnosing my Power Distribution Panel. Here is a link to YouTube and I welcome all critiques, comments, and suggestions Thank you Lugnuts https://youtu.be/RcKYPWq_DLo
  14. L

    Power Distribution Panel M1083A1 10/98

    On the board are numbers denoting what socket number is on the rear and with this there a diagrams telling what wires go into it and there location. Looking specifically for J302 but if someone had J301- J309 and wouldn't mind sharing them I would be pleased and could continue know exactly what...
  15. L

    Power Distribution Panel M1083A1 10/98

    I am going back to a discussion earlier in this thread that discussed the Power Distribution Panel on the 1083A1. I am wondering if anyone has one for sale? I think NDT showed me a picture of one to clarify what I had. I am definitely becoming more intimate with this truck and I think becoming...
  16. L

    Power Distribution Panel M1083A1 10/98

    Dude, you are like my HERO!!! I haven't mastered how to give you brownie points for this on the site but be it known I have been looking for these schematics for a while. Went to National Guard, they gave me everything they had but as far as they went was to the "10" Operators Manual. If you...
  17. L

    Power Distribution Panel M1083A1 10/98

    It has been a while since I last wrote on the electrical issues. If I ever get bored with life I go and work on the 1083A1. I can repair a problem and then close the door on the cab, come back a day later, and I'll have a new problem. I got the turn signals working, the horn is now working and...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks