Search results

  1. F

    homeade suitcase wirefeed questions.

    I am looking to use my civilian generator welder, a lincarc 225 dc pos and neg welder, to power the arc function of a wirefeed and use the 50 hrz 3,000 watt generator part as the power to trigger and drive the wire. the reason is i have limited space in my welding trailer tool boxes for any 115...
  2. F

    The 10kw gas genset runs!!!!!

    Well after tracking down tune up parts, burning up a starter, finding a starter and getting a spare, setting time close, and getting batteries and fuel hose it runs. at first the plugs on the front of the control panel were working after field charging the fields. now they dont work after...
  3. F

    Unimog Tractors

    Near where i live there is a contractor who has a snow plowing contract who has a mog. on the unit there is if i recall right a 200-300 hp mercadise engin mounted in the bed and a a tranny to fit. the drive shaft is chain driven under the frame and he has an enormous blower on the front. the...
  4. F

    Splicing in a 12-volt light

    napa should have 24 volt bulbs that would fit in the assembly. atleast in the north central washington area as we have many farms and people on mountains that just use batteries for power.
  5. F

    Need starter for the 4A084-3 10 kw genset

    I just received a call today from a company in florda who was wanting to sell me a reman starter for like 350.00 not new just reman but he said it looks new. i found a company also who has the 12 volt version and they said they are looking into making a 24 volt version if the need is still there...
  6. F

    Need starter for the 4A084-3 10 kw genset

    Bruce Hotz. he is in orlando florda i will ask if i could provide his contact info as all i had was a yahoo id and a name. just to be curtious to him. i will keep up and post as soon as i can. i will wait to see if the thing is for real or if he was playing but seems true. i still cant believe...
  7. F

    Need starter for the 4A084-3 10 kw genset

    I have found the mother load. I found a guy in florda with like 40 of them. he is testing 2 for me tomorrow and will be sending them to me. oh and by the way for just the cost of shipping. thats right no cost for the starters. ha ha ha i ordered 2. i will post how the business deal went and if...
  8. F

    Need starter for the 4A084-3 10 kw genset

    Thanks Ive posted some requests waiting for replies.
  9. F

    Need starter for the 4A084-3 10 kw genset

    is the 4a032 engine the same starter as the 4a084-3 engine?
  10. F

    Need starter for the 4A084-3 10 kw genset

    Well I figured since the 2 -12volt batteries were not holding charge long enough even though they were brand new i would use my dc generator welder. I set the volts to 24 volts but there were not enough amps so i cranked it up till it turned over it worked for several days then i was way over...
  11. F

    Need starter for the 4A084-3 10 kw genset

    I used too many amps and volts to jump start my 10 kw genset as i was setting the timing. I took my starter to a local rebuilder and my armature is toast. im not uposed to having it rebuilt but life would be easier for me if anyone happens to know where i could get a working take-off unit or new...
  12. F

    Gen Set Q

    if it is a 10 kw gen set under the control panel there should be a switch to select what phase and volt you want such as 120 single phase or 120/240 single phase or 120 3 phase ect. as for connecting it. there are manuals on this site with info on it. if i recall correctly if you wan 120 single...
  13. F

    10 kw 4a084-3 engin timing info needed.

    so far i have fried the starter and will be looking for a starter rebuilder soon. timing was way off the mag had must have been removed because the marks were off by about 4-6 teeth as i tried the last time to fire it off it wanted to fire off with a puff of smoke but now starter is very bad...
  14. F

    10 kw 4a084-3 engin timing info needed.

    I have a points, condenser, and cap and rotor on the way from saturn. and now i need to time my beast. it is a 10 kw gas generator with the 84 cid 4a084-3 engine. i have downloaded all manuals here for the generator but i still have not found the points gap requirements and the timing specs. i...
  15. F

    Gen Set Q

    There is manuals on pdf format i believe here about the generators. it tells you what to attach to on the 3 phase to get 120 or 120/240 single phase. also if it is one of the 10 kw sets it will have a switch behind the front control panel that selects what phase setting you need.
  16. F

    Need points kit for a 4AO84 in a 10k Genset.

    my 10 kw gas gen-set is made by the Hercules company and i am too looking for points condenser and the timing info i know how to use the inductive timing light on a standard spark plug wire temporarily to set it but i just need what it is supposed to be set to. a local guy tried to sell me a...
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks