• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. C

    Leaking Heater Core

    I’ll be taking them to a shop in Tampa to get a larger shops opinion.
  2. C

    Leaking Heater Core

    Well…. The radiator shop called and said he can’t fix either core, so I guess I’ll need to try one of those new cores out. I know the cores are pretty basic, but does anyone have a military radiator expert that may be able to work some magic on 2 heater cores?
  3. C

    Leaking Heater Core

    Being in Florida, I’ve only used the heat once. I verified my NOS core is leaking so 2 cores to the rad shop tomorrow, then I’ll have a spare. Has anyone used the new heater cores I’ve seen online? They look slightly upgraded. Heater Core Upgraded?
  4. C

    Leaking Heater Core

    Today's update: I removed heater core from the truck and applied permatex sealant between the petcock and the core. I rinsed the outside of the core off and refilled with coolant and water. I'm going to let it sit overnight in an upright position and see if I get any leaks. I'm going to...
  5. C

    Leaking Heater Core

    I didnt see a leak at the bleeder, but tomorrow I will remove the top cover on the heater core housing and idle the truck so I can see exactly where it may be seeping from.
  6. C

    Leaking Heater Core

    The clamps are pretty tight, but I will definitely check. I didn’t see any coolant near the stubs, only in the bottom of the box. here is the spec on the hose I used. 5/8 Inner diameter (epdm, 95psi rated) Gates Green Stripe Heavy-Duty Heater Hose
  7. C

    Leaking Heater Core

    My heater core looked like it started leaking so I replaced the entire blower / heater core with NOS as the blower wasn’t working anyway. I also replaced the hoses and clamps. Started the truck and it looks like the NOS unit from 1985 is leaking too. Is there any other problem that could...
  8. C

    Where to find fuel filters for Multi Fuel M35a2

    Primary Fuel Filter with Correct Gasket If you buy the filter at Napa it will not come with the correct gasket. You need the WIX 5131 gasket.
  9. C

    Out of Round Tires

    Have you check the tie rod / tie rod ends for excessive movement? I replaced my ends which helped wobble at increased speeds. Steering at slower speed also feels much better now too.
  10. C

    Hydraulic Head Rebuild

    I have had luck removing cleaning and reconnecting lines, I’ve learned not to go too tight or they leak from the start.
  11. C

    What did you do to your deuce this week?

    We have property in the Pacific Northwest and I will be taking Deuce 2 out there so want to be able to start in the negative temp range. Deuce 1 has its flame heater deleted as it will live in Florida, speaking of flame heater, I was sold this replacement spark plug with a different part...
  12. C

    What did you do to your deuce this week?

    More work on Deuce 2… Replaced 6 fuel injectors, new copper washers and new rubber injector seals Replaced fuel Injector return line to include all new fittings Replaced primary fuel filter Replaced fuel tank to primary filter head hose Replaced hose from primary fuel filter head to injection...
  13. C

    What did you do to your deuce this week?

    Finally finished a large serving on Deuce 2 to include: 6 new inner hub seals 4 new outer axle seals 2 new front axle tube seals 6 new axle lock washers 6 new brake cylinders and associated banjo bolts, washers, etc. All new rubber brake lines 4 new hard lines on front and center axle Power...
  14. C

    Tie Rod End Removal

    I could not get the ends off the rod, tried larger pipe wrench, heat, multiple sprays banging with a hammer to break loose some rust…. No luck. I ordered a heavy duty tie rod from Boyce and used NOS tie rod ends. I’ll play with getting the ends off the old tie rod when I have some extra time...
  15. C

    Tie Rod End Removal

    I’ve removed the tie rod end from the knuckle. I’m not able to get the tie rod end to budge using a 14 inch pipe wrench. I can try some heat.
  16. C

    Tie Rod End Removal

    The tie rod end on the drivers side. I updated the post to avoid confusion.
  17. C

    Tie Rod End Removal

    I am trying to replace my tie rod ends during a front axle service and I cannot get it to come off. I tried a 14 inch pipe wrench as noted in the TM I attached, but maybe I’m not placing it in the correct place to get enough torque. I’ve hosed it down with Pb blaster numerous times as well...
  18. C

    Ross Steering Gear Box

    Check pages 224-225 Steering Box I have an older reference that list the same part number for each bushing. The linked TM shows a separate parts number for each. 5294084 7373343
  19. C

    Multifuel Reliability or The M35 itself

    I‘ve only been working on my multi-fuel for a couple of years now and haven’t got into any major engine mechanicals yet… but would some thing like a Fluid Dampr product to replace the OEM harmonic balancer help with it’s possible issues? Fluid Dampr
  20. C

    Steel Soldiers giveaway sponsored by hawkerbattery.com

    Please include me in the drawing!
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks