Search results

  1. D

    Do You Cover Your 803?

    I used the 1/4 screen on my new 803A with zip ties . I bought it at TSC. I would use something more substantial on the bottom hole. It is not used for air flow just drainage and the time to put it on is before you install it because you will probably never be able to see it again to check it's...
  2. D

    Do You Cover Your 803?

    Sorry I'm not sure where I got it. I just had it under my work bench. I think a buddy got it for me from a scrap dealer. You could get a piece of aluminum and drill a bunch of holes in it. You can cut aluminum on a table saw with a fine tooth carbide blade.
  3. D

    Do You Cover Your 803?

    I was putting batteries in my new 2006-803A and noticed that the foam that goes over the lower drain hole sits about an inch above the floor. My 2004-803A has the foam right against the floor. I don't know if it was installed improperly or if it is a design change but it certainly won't keep...
  4. D

    Do You Cover Your 803?

    The 803a's were designed to be outside but once they have been stacked or had heavy stuff stored on them the top gets bent down and water flows into the electrical compartment. I thought the joint was siliconed but I just won a mint 2006 and was surprised when I took the top panels off. No...
  5. D

    Do You Cover Your 803?

    My apologies to the military purists but my wife wouldn't let me put a Dessert sand generator that had been painted with a brush in Afghanistan next to the house so I had to repaint it. My new 803A has a very nice camo pattern she may let me keep it. I had the local truck tarp guy make this up...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks