Search results

  1. m139h2otruck

    Wiring a 3 kw set to house

    Bump
  2. m139h2otruck

    Wiring a 3 kw set to house

    Have done multi searchs for the wiring info suggested in the posts to this thread. Can't seem to find it.
  3. m139h2otruck

    Wiring a 3 kw set to house

    Now, since the 240 volt position on the selector switch is not usable on a home system without additional work, what about the 1.5 kw sets? I just got one of these too, (not picked up yet) and am wondering about the wiring for these units.
  4. m139h2otruck

    Wiring a 3 kw set to house

    So, 240 volt single phase mil is not 240 volt single phase std? This could be exactly the problem. Any further explanation for why this is so on this type of gen set?
  5. m139h2otruck

    Wiring a 3 kw set to house

    All good points. 1) Yes the garage sub panel was disconnected from the house/main. Garage is single phase 200 amp box 240 volt. 2) Yes the voltage was checked at the L1 and L2 terminals and showed 240 volts between them and 120 volts from hot terminal (either L1 or L2) to ground. Gen set...
  6. m139h2otruck

    Wiring a 3 kw set to house

    Tried to wire the 3 kw set into the garage to test for possible use during a power outage. The terminals show the correct voltage of 240 volts between the L1 and L2 terminals with the switch in the correct position, so I wired up the L1 and L2 terminals to the hot legs of the fuse box and the...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks