Search results

  1. WillWagner

    Import Paper Work

    As some of know, the Museum has decided to sell an FV603, the one here, We do have some people interested, but it occurred to me that there MIGHT need to be paper work involved, like import stuff. We have none. Do we need...
  2. WillWagner

    CA S208 /TSC-15 Shelter

    Unknown year S208 shelter. This is on the heavy side, 1900 lbs. There is still some compartments in it, there is also a small patch on the roof, no leaks inside. Shelter is 77 inches long. Located in So. El Monte, Ca. Can load out, no shipping. $2000 OBO PM me or call, 626-840-1751. Due...
  3. WillWagner

    CA S250 Shelter

    1964 S250 Shelter. Clean inside, a couple of small scratches on the outside, passenger side of the shelter, no holes. 86 inches long so it is long for a short bed truck. Can load out, no shipping. Located in So. El Monte, Ca PM me or call, 626-840-1751 $2000 OBO Due to the amount of...
  4. WillWagner

    CA Alvis Saracen FV603

    FV603 for sale. Weapons Cradle still in it. Runs, but needs work. It has a fuel system issue, the tank was removed and that is all we know about it. The tank is in it, but not hooked up. It did drive into its spot when it arrived. I do know there is a new carb in the carrier along with boxes...
  5. WillWagner

    CA 1965 M35A2 Wo/W

    1967 Deuce, M35A2. No winch, rebuilt Air Pack. Starts, Stops, drives. Ca Non op historic tags. Lights work . Has bows and comes with extras, like wheel cyls, wheel seals, axle boots. Might even be able to find other things around the compound to throw in. Hard top, C turbo, heater This is a...
  6. WillWagner

    CA 1100 x 20 16PR FirestoneTires

    1100 x 20 16 ply Firestine 831 tires. New condition, they were mounted and then dis mounted. A couple have wear marks on them from being on a steer axle, the majority have the nubs and/or the center flashing seam still on them. 20 available, you can pick the ones you want, stored under cover...
  7. WillWagner

    GPA anchors

    How does someone ID an anchor for the GPA? I have read that the two rectangle holes in the flukes are correct, but have also read that those don't matter because some were issued sans the holes. Who/what is correct? Guess I could call Brent Mullins. Lets see what happens here first though, don't...
  8. WillWagner

    M1236 Cougar?

    A place I know of, has in their posession, what I believe to be a BAE produced MRAP/Cougar H M1236. 4x4, Cat powered, very dirty. Been sitting there a while. Guess it sorta belongs to a local PD. It was towed there, non runner. I was there and they asked about it. Seems they cannot get the...
  9. WillWagner

    Starter Bendix Help

    A friend of the Museum had his jeep towed to the Museum with a no crank issue, troubleshoothin found the issue to be the starter locked up. Pulled the starter and found that the front capscrew that holds the spring to the bendix had come out and wedged itself between the bendix and housing. The...
  10. WillWagner

    Deuce Lube Order, LO 9-2320-209-12

    I've seen a bunch of threads about lubing these pigs, I have a LO and was gonna scan it and put up, but, there is one buried in the Deuce TM section. It isn't titled LO, it is on page 2 near the bottom under "Deuce TMs". I will put a link here and sticky it for ease of reference...
  11. WillWagner

    More Tracked stuff!

    The museum also owns an M114. The data plate nomenclature says T114. The t114 variant was the tank Killer, had a 106 recoilless mounted at the Commander's Coppola. There weren't too many made, I think it was experimental. This particular track has US Air Force markings. It is marked TRTG...
  12. WillWagner

    M4 Sherman fixing....sorta

    The museum has three M4 A3 E8 Sherman's. One is a runner, the other two are just display. This particular tank was a save from a gun range. It acquired while it was still on the Range but unmolested. Was pulled off the range and put on a road for pickup. Nobody told the aircraft that were using...
  13. WillWagner

    Canadian Mk l Bren Carrier parts help

    HELP!! Getting the carrier up and running is requiring some parts. FP looses prime, no adjustment on the idle circuit on the carb and the filter is full of.....stuff. Got the fuel pump part handled, Then and Now put together a nice kit, Got a carb kit on the way from The Carburetor Shop. One...
  14. WillWagner

    1941 Bren Carrier, Type 1

    Had a chance to get this gem up and running, Has some small issues with the fuel system, guess that's what happens when things sit with gas still in them!! Hopefully in a few weeks I'll take it for a spin around the compound. Working on this for a friend of the Museum, been almost 10 years since...
  15. WillWagner


    BIG shout out for his help today dragging a no brake M35A2 from Glendora to the Museum in So. El Monte. Much easier with someone familiar wit MV's. Again, if you need some help, give me a call!
  16. WillWagner

    M8 Greyhound help

    Does anybody out there have an oil pump out of the Hercules JXD out of a greyhound? The M8 at the museum has had a hard start condition since the last time it was parked. I dropped the oil pan today and found the whole inside of the engine dry. The oil pump is really funny it has 3 inlets on it...
  17. WillWagner


    The Museum has an MB that looks good, it is a mix master, has odd things installed in the wrong places, etc., but in solid shape. It is one that goes out for display at Veterans events and other places. It runs and drives nicely. Craig noticed that the steering was getting hard just before the...
  18. WillWagner

    WC9, 18 or 27

    Gotta check the S/N to see what it is. This truck has been around. The paperwork shows lots of paint and brake work. This was a back up truck for M.A.S.H. back in the 70s-80s, I think it has screen time. It was pulled from the display area last summer to give it a make over by volunteers, summer...
  19. WillWagner

    Sherman, Hellcat, Priest Wright 975-C4 Radial

    The engine above was used in the tracks listed above. The engine uses a Stromberg NA-R9G, 2 5/8 inch venturi, updraft carb. Anyone out there have a contact for parts for that carb? I am in need of an inlet strainer and some gaskets and everyone I have tried can't find anything, it s like it...
  20. WillWagner

    Vapor Locking?

    A guy I know has an AM General made A2. He took it out to the desert last weekend and after 3 or so hours of trail riding, it started to hesitate and eventually stopped running. He removed the plug on the bottom of the carb and some chunks came out, re started it, drove a bit and it started...
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks