I am not able to get the fuel tank electronics out, the part that screws into the tank seems to be stuck. I used a bar and a wrench but could not break it loose. I even sprayed some stuff on it too. Any ideas or of were I could get a new one??
Appreciate the Help
If I remove the board do I put 24 volts to the glow plug and how do I turn the starter over if I remove the board. The board also seems to supply power to the glow plug I believe from what the schematics show? How do I get around this board.
I appreciate the help
I have all the manuals for this Generator and I have a lot of knowledge in electronic (circuit Level) The manual tells me how to test it and its seems to test ok but I have not been able to get it to start it does not supply voltage to the glow bug when I put it in warm up or prestart.
I Know these pictures are not that great. I will get some better ones. The Engine control board is what keeps the engine from starting. This board supplies power to the aux fuel pump and the glow plug. I will try and get a pic of the board.
I have alot of the manuals for this generator but when I follow the Procedures on how to start it and then turn the knob nothing happens at all. I have tested the boards and followed about all the wires in the schematics to make sure they are all connected properly. I have also tested the switch...
I am New Here. First and Fore most I bought a generator mep-016b and have hooked up two car batteries getting 24volts. I hear the timer running but when I go to turn the switch it does nothing. I have come to believe that the engine control board on my unit it bad. I tried to get some parts to...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!