Search results

  1. S

    Starter Boxes

    If you want me to try out the white Nartron, I will gladly. I am tracking down in issue in mine with the same box, and both I and Kascar think my box is bad...
  2. S

    New to Me M998

    Nah, I just turn them on and wait to start, then start. I had previously, on my old plugs when I suspected they were shot, tried many methods including on-off-on-start. NOT on the current ones.
  3. S

    New to Me M998

    It may work to buy a TSU next time I buy another set of glow plugs. Yet $80 a pop, I really do not want to buy another set of glow plugs if the TSU is not the issue. On the same note, I would not like to spend the big bucks on a new S3 box if a TSU will do. So again, I do not have a blinky light...
  4. S

    New to Me M998

    Interesting. I did not have any wait light blinking issues. Just blown glow plugs shortly after replacement. After I unplugged the TSU, the wait to start light did blink fast. I am unsure about how to test the TSU and if I should "assume" which part is actually bad and causing the glow plugs to...
  5. S

    New to Me M998

    link_fixed
  6. S

    What you guys think of this M998?

    Although the original post did not follow *posted rules* I will add in my two cents. Do not buy one because it "looks" together with a top and doors. They will be crap! Mine "looked" together and yet I will be replacing all the doors and top. I would def buy one that "needs" more for less...
  7. S

    New to Me M998

    So here is my smart start and my TSU. Any pointers on finding out if they are "paired". No yellow strip that I see. It does look newer than the box and has thread tape on it. The numbers do appear to "match". Is that what it takes? Is there a way to test the TSU? Updated picture link.
  8. S

    New to Me M998

    So I do have the Nartron Smart Start System with white label and all my glow plugs have been detonated. My educated guess, and as RWH stated, my box may be bad. What would be the best way to test the box? Should the glow plug lead read 24 volts at the run position? I was trying to get a reading...
  9. S

    New to Me M998

    I feel like a newb. Yes, I mean Glow plugs. I did not pay attention to what I typed. I looked at the sensor on the rear of the motor just for second when I was pulling the plugs back out and it had all the dirt and grime on it. I did not see any yellow band, but if it is there, I would have to...
  10. S

    New to Me M998

    So I installed the glow plugs I ordered from Kascar. I put them in, they worked a couple times, and then all of a sudden it was hard to start again. I checked them, and even had to use the tool to pull a couple of them. I found all of them swollen. Prior to install, I did not have any issues...
  11. S

    New to Me M998

    Funny story....my 3 year old loves the Humvee. He wanted to go for a ride in the "Humbee" and so we did. He giggles and laughs the whole time! Anyways, I went to start it and a noise startled me when I turned the key to the on position- windshield wipers moving on dry windshield! Awesome news as...
  12. S

    Go Big Or Go Home

    Yup, that thing is big! Awesome looking build! Does it still fit under overpasses??! Good looking ride.
  13. S

    Manual Override of Glow Plug Controller

    Hey Artmac, I figuring you mean you would like to hard wire the glow plugs to a toggle switch to bypass the need for a smart start box? If so, I am also interested in that possibility in the future. It makes sense to my simple thought process that an individual could wire all the glow plugs to a...
  14. S

    New to Me M998

    I also noticed that my engine temp goes up to about 210 and then the fan kicks on an drops to 200 or just below and then heats up and then fan kicks on. I read as long it is below 240 we are good...right? When I do a coolant flush at some point, I will prolly change the thermostat with the rest...
  15. S

    New to Me M998

    So I did some work on my MV yesterday: Installed 5 out of 8 glow plugs. 3 are swollen and need help getting out. Installed the grounding harness. Funny thing, I would shift into drive, and if the fan was on, it would short and go in and out. Now it does not. Awesome! Installed Those Military...
  16. S

    Southern Metals Wilmington NC Humvee parts

    Its funny because they are in the pictures!
  17. S

    Sf97 6 weeks so far GOVplanet

    SF97 Wait times... Post them! So I am awaiting my Sf97. My EUC cleared in record time at approx 2 months of waiting from submission to approval. EUC cleared on 10/25/16. I paid for a SF97 at the time of sale of the MV.
  18. S

    New to Me M998

    Wow, that is an interesting contraption. I wonder what went in it? Was that in the cab or was that bolted on the back fender?
  19. S

    New to Me M998

    368TH MILITARY INTELLIGENCE BATTALION CI COMPANY C (WZP2C0) CP PARKS CALIFORNIA Last Mileage 14053 Thanks to Bikeman, I was able to learn about my truck and know the mileage is actually recorded! Pretty cool. I was wondering why it had all the comm stuff. It was an Intel truck:). It also has a...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks