Search results

  1. R

    Newbie from GA

    Welcome from beautiful downtown Fort Valley, GA. I've got 2 deuces, always glad to see more enthusiasts!
  2. R

    New m108 Crane Truck Project

    People that let trucks like this get into this kind of shape, need to be taken out and shot!!
  3. R

    002a fuel lines

    All the hose on the 002/003 gensets is -5 (5/16" nominal), except the return line from the IP which is a -4. The -5 is expensive and usually hard to find. Two things I do with my gensets is change out the adapters and change to -6 hose which is easier to find - if you can find some surplus...
  4. R

    M35A2, fuel pump not working. How do you prime without.

    FYI: You can get 24 volt fuel pumps from RockAuto.com around $30 - I've used them and they work fine.
  5. R

    First Deuce!

    Good lookin' truck! Welcome from middle Georgia.
  6. R

    New here from central Florida

    Welcome from Georgia! I've got a couple of deuces - M35A2 and M49A2C they do take a little work, but I wouldn't trade them for anything.
  7. R

    WHAT?!? $756.32 Won EVERYTHING! (M35A2)

    That's not fair, you have an inside track! :-)
  8. R

    Official 2014 SS Georgia Rally Info SSGR14 thread

    Someone left about a one inch thick USMC manual on the tongue of my trailer Sunday morning (right between Gunnermac and Streamline). PM me and I'll get it back to you.
  9. R

    Official 2014 SS Georgia Rally Info SSGR14 thread

    Robo If you can give me an idea or even a list of what you need, I can check it on my deuces if need be. I have many thousands of new milspec nuts, bolts, washers, screws, etc (and a few used ones too) from a military surplus business I used to have. You're welcome to whatever you need that I...
  10. R

    how to get on base --- Warner Robins?

    I know it says to call for an appointment, and occasionally I do if I have big lots to pickup where it will take multiple trips. I've picked up there for several years and they have never asked if I had an appointment or not. (Used to be stationed there before GL took over) Mark is one of the...
  11. R

    1952 M135 W/Winch

    You're doing a great restoration job! I love my M35 and M49, but I really miss my XM211 - should never have sold it.
  12. R

    Need pickup help Warner Robins GA 2 small Hunter heaters

    If MDMorgan can't do it, I can pickup and store. RayK
  13. R

    Different (to me) crank won't start problem

    The fuel shutoff shaft inside the fuel shutoff cover (not the shaft that goes through the cover at the end of the engine stop cable). Sorry, I got ahead of myself.
  14. R

    Different (to me) crank won't start problem

    I've had the crank won't start problem on other deuces, all I did was clean and lube the shaft and it worked fine. This time, if I remove the two safety wired screws the shaft turns freely. As soon as I put the two screws back in, it doesn't want to turn. The TM's don't mention this problem...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks