• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. Anvil Motorworks

    LS swap headers -what did you use?

    If you still need to find hoses like reducers and reducing elbows and such, HPS has a good catalogue of parts to pick from. Below is a pic of the reducing elbow I used to connect my water pump to the custom coolant pipe I made. I’m running an electric fan so I definitely have more clearance but...
  2. Anvil Motorworks

    LS swap headers -what did you use?

    Universal headers for your LS will work just fine and I would even bet the factory manifolds will work too. It’ll be tight on the passenger side next to the frame rail but it’s doable even with 2.5” exhaust tubing. As for the coolant hoses I had planned to manufacture hard pipes for the LT...
  3. Anvil Motorworks

    LS swap headers -what did you use?

    Look into shorty headers. Vaportrail and I have a LT swap using shorty headers as the drop is better. LS headers are different at the flange so make sure you get LS specific shorty headers.
  4. Anvil Motorworks

    Humvee Body Lift

    Technically you don’t have to mount them since they will be clamped between the body and fuel tank. However if it were me I’d either attach them to the tank or drill a couple of holes so that you can use a screw to go into the body. You can recess the screw head by just drilling a second hole...
  5. Anvil Motorworks

    LS motor mounts -what’s available

    You could try using a LS to SBC adapter plate mounted to the factory diesel engine mounts. I believe the 6.2 and 6.5 have the same three mounting hole position as a traditional SBC. I haven’t done a LS swap only a LT swap so I’m just throwing some ideas out there. I’m personally not a big fan of...
  6. Anvil Motorworks

    Humvee Body Lift

    Nope you have the winch front bumper so you should be able to use the front brackets which will lift the hood up in place of having to do spacers. Keep in mind if the winch plate you have mounts to the out hood brackets it will lift the winch bumper as well. Also if you plan to use the winch...
  7. Anvil Motorworks

    Humvee Body Lift

    It’s for the A Pillar. You can’t replace the mounts there since they are welded so you have to use blocks with longer bolts. Also need to be mindful of what front bumper you have because if it’s the standard bumper with the three holes you can’t use the new front brackets, must use hood spacers...
  8. Anvil Motorworks

    LS Engine Swap, why?

    LS is definitely a cheaper alternative swap as you can easily adapt the factory mounts to an adapter plate and be good. If using a 4l80e, even easier as the linkage and all would be the same as well. You’d only really need to sort the fuel and cooling system. I decided to go with a little more...
  9. Anvil Motorworks

    LS swap lower radiator hoses????

    I would use a swivel neck then modify the factory lower coolant pipe. Here’s a pic of my setup for an LT engine. I did away with worm style clamps and switched to tension clamps for all my coolant lines.
  10. Anvil Motorworks

    Humvee Body Lift

    Spacers are definitely a cheap option but realistically it will cost you more than $100. You’ll need to source longer grade 8 bolts for all body mount locations and you’ll also need hardware for the hood lift. Tank strap can be extended if you can weld but if not you’ll need to source, which btw...
  11. Anvil Motorworks

    Using 4l80 in Humvee with LS?

    The 6.6 L8T is a great engine but it’ll come with with the 8 or 10 speed trans. Of course you can always adapt a 6l80 as it will bolt right up. I built engine and trans mounts for the LT engine platform as I have a built L86 with a built 8l90 adapted to the np242. I’ve spent a lot of time making...
  12. Anvil Motorworks

    Humvee Body Lift

    We manufacture body lifts for both H1 and Humvee applications, even REVs. I will say that there are a few variables to consider when looking at these kits. For instance if you are using the factory style standard bumper with the three holes vs a winch plate you’ll need different brackets or...
  13. Anvil Motorworks

    Using 4l80 in Humvee with LS?

    if it’s a 6.5 NA I’d pull it out and swap in a LS with the 4l80. With a standalone setup you shouldnt have any issues just need to figure out the correct flexplate and converter.
  14. Anvil Motorworks

    Suspension refresh/upgrade Control Arms

    Poly bushings are good for some applications but I’d steer clear of them on the Humvee. They won’t last nearly as long and the problem with poly is when they fail its catastrophic. With rubber, they will last longer and only slightly deform as they begin to fail making them a preferred option...
  15. Anvil Motorworks

    Stainless Brake lines HMMWV

    I would check with Rubberduck4x4
  16. Anvil Motorworks

    Anvil Motorworks Introduction

    Actually my swap is a 6.2 LT with 8l90 trans. Both the engine and trans I built as stage 1 performance so should produce around 500hp and 500 ft-lbs. I’m also using the factory NP242 that I adapter to the 8l90. Geared hub will definitely be spinning but those have been upgraded as well to 12k...
  17. Anvil Motorworks

    Anvil Motorworks Introduction

    Thought I’d introduce myself as well as my company. My name is Justin and I’m the owner of Anvil Motorworks that manufactures Humvee and Hummer H1 parts. I started in the Humvee industry about 4-5 years ago selling X door seal kits and from there it started to turn into something more. Today we...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks