Search results

  1. Overdrive

    M1101 / M1102 Tailgate Wanted

    Need a trailer tailgate. Can be messed up. Thanks! OD
  2. Overdrive

    M1101 / M1102 Axle Wanted

    Looking for a complete axle from an M1101 or M1102 (same i know). Thank you OD
  3. Overdrive

    Wanted: M1101 M1102 Lunette hitch

    Need the hitch insert with shock, bolt, and spacers (M1101 or 1102). I figured there are a number of folks that are switching them over to ball mounts so someone should have one laying around for cheap. Thank you 🙏 OD
  4. Overdrive

    MEP-903 Generator In S-805 Electronic Repair Shelter - Road To Startup

    Just brought home an S-805 shelter with ALL the MEP-903 generator components in tact. I wanted to use this post to document the checkout and startup (attempt) of the generator since there is very little info/discussion on the MEP-903 generators. Generator Setup in The Shelter: Generator...
  5. Overdrive

    S-788 Shelter and 1102 Gen Trailer Project and 1600 Mile First Run

    Returned from Overland Expo 2018 on a 3200 mile (round trip) cross country run with my S-788/1102 project with a build time of 2 months... Never doing that again! Expo was a bit dissapointing this year. Lots more people and seems like its turning into a social event... Like a trendy thing (if...
  6. Overdrive

    S-280 Shelter Built ( actually AN/GRM-86X ) with M720 Dolly as a Travel Trailer

    Here we go! I am calling my HSTRU build complete so moving on to the next project. I am putting the M1102 & S250 shelter build on hold (kid likes it for a playhouse) while I move to my newly acquired AN/GRM-86X Electrical Equipment Maintenance Shelter and M720 Dolly set. Basically it has the...
  7. Overdrive

    M720 Dolly Set (Mobilizer) Weight Specs Clarification - From the TM

    I have seen various specs on the M720 Mobilizer scattered in different posts here on SS. Reading through the TM 9-2330-285-14, what I have read and what is in the book are different on what weight the dolly will carry. Here is the info strait out of the TM, Change 1, paragraph 1-9: Weight...
  8. Overdrive

    LMTV / FMTV AC Air Conditioner A0 Fabricated Pulley (prototype)

    I know we have a MILLION AC threads going on in here and I was going to post this in my AC Compressor Brackets Install thread but that one is pretty cluttered now too so I decided to post a separate item. Going to try and keep this thread specific to LMTV compressor drive and tensioner pulleys...
  9. Overdrive

    LMTV Gunners Platform Install Start

    LMTV Gunners Platform Install FINISHED I have been busy reconfiguring my workshop for the winter to try and fit the new M1082 trailer and M720 Dolly Set inside so I can work on all the military fun things when the weather gets bad so I haven't posted lately. Still messy but everything fits...
  10. Overdrive

    M1082 Just Recovered... Not sure what to do with it but it's home

    Well, I didn't see a whole lot of uses for the LMTV M1082 trailers but I couldn't pass up the auction prices out of Ft. Hood the last few weeks. So... here she is. It is a trailer so I guess I will do some trailering with it ;) Oh and I got the M720 Dolly set home finally as well... WAYYYY...
  11. Overdrive

    LMTV - CB Install Complete and Tuned

    Finished installing my CB setup and tuned with SWR meter. Control box installed under the driver seat. Fabricated a plate to cover the original military antenna hole mount. CB: Cobra WXST with Firestik 2' antenna and Firestik fire ring 18' cable. For some reason it feels like the LMTV is...
  12. Overdrive

    LMTV - Brake lights stopped working (Troubleshooing) Follow-Along

    OK, I have been piddling around with not fixing my brake lights that stopped working when I picked up an M1082 from Ft. Leonard Wood for a friend. So, I am determined to troubleshoot and fix the problem and will keep updating this thread with the adventure... 1. Issue - brake lights were...
  13. Overdrive

    LMTV Air Conditioner AC Main Unit Gen1 and Gen2 Details

    Starting a new thread to have this info easily available. I will be updating this post with pictures and other information scattered throughout this forum. Some info and pics were gathered from others who are on the quest for a cooler cab. As I add pictures I will probably group these details in...
  14. Overdrive

    LMTV - Let's add Lights and Power to The Troop Driver's Warning Switch

    I am working on 5 things at once as usual but this little mod has been rattling around in my head for a few months now. I have a lot more important stuff I should be working on the LMTV but I thought I would take a brief pause and make this little thing... I removed the original switch and...
  15. Overdrive

    LMTV / FMTV AC Air Conditioner Compressor Mounting Brackets Install Write Up

    I posted some of this in the AC thread but thought it would be helpful to have its own write-up for the AC Compressor brackets installation. This is a write up using the two key upper and lower brackets used to install an air conditioning compressor on an LMTV. I did this installation on my 1997...
  16. Overdrive

    LMTV - Sound Proofing & Insulation Mods (Post Your Proofing)

    For this thread I thought instead of a how to I would just post up a couple of pics of my adventure adding sound proofing to the inside of the LMTV cab and ask others to show the same. I have seen several other folks post pics of their sound proofing but I didn't see a specific thread for the...
  17. Overdrive

    LMTV - What's Behind Door Number 2? - Pic & Diagram Behind Heater

    This is just an FYI post to show what it looks like behind the heater and what the major stuff is behind there. I took this in the middle of my Gen2 AC install so there are huge holes that I had to drill in the cab floor that won't be there on a stock truck. Just in case you were wondering...
  18. Overdrive

    LMTV Radiator Drain Petcock Replacement?

    LMTV Radiator Drain Petcock Replacement - DONE I messed up my radiator drain petcock. Original one was seized so mangled it to drain radiator. Anyone have a source for a replacement? Seems hard to find one with the 90 degree drain port so I just used a generic petcock I picked up at O'Rilies...
  19. Overdrive

    Question - assistance converting air park/emergency valves to single unit

    Converting Park/Trailer Manifold Valves to Single Haldex Unit UPDATE: Mission Complete. Successful Park/Trailer manifold valve replacement. All the follow-on posts are mostly me and others trying to figure everything out. I have summarized the switch over in this first post so you don't have to...
  20. Overdrive

    LMTV Trivia - Tailgate Hold Open/Down Wires... Who Knew?

    I was admiring my LMTV today and I noticed a couple of times previously, these little loop wires inside the holes under the tailgate on both sides of the truck. I hope I wasn't the only one who didn't know what they are for. I just realized what they are... They are used to latch onto one...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks