Search results

  1. Slate

    What did you do to your deuce this week?

    Doesn't like there is much wrong with that cab. Don't trash it. Someone may buy it. Sent from my moto z3 using Tapatalk
  2. Slate

    Rebuilt air pack why wont brakes release?

    The little stem connected to the diaphragm in the valve system had a little corrosion. 00 wool and lube was the only difference. So I either blew something out with the service valve open or the gremlin causing the issue took a break. Didn't work yesterday but this morning everything was working...
  3. Slate

    Rebuilt air pack why wont brakes release?

    Pulled the valve side apart still on the truck and. Everything is in order, in the right place and lubed. Just cant figure it out. Sent from my moto z3 using Tapatalk
  4. Slate

    Rebuilt air pack why wont brakes release?

    Opening the rear service line brakes release and work fine. So I'm guessing the dang$#@ airpack is still the issue. It's probably me not the airpack. May take it off again and clean and lube a little more. Sent from my moto z3 using Tapatalk
  5. Slate

    Rebuilt air pack why wont brakes release?

    I do have a question when bleeding the bleeder circled in red. Should it have pressure on it like the rest of the system or should it just trickle? Because everywhere else there is plenty of pressure but this one just trickles. Sent from my moto z3 using Tapatalk
  6. Slate

    Rebuilt air pack why wont brakes release?

    The tube that had the crimped tube on it is a service tube not a vent all it does is drain tanks. The one you show in your pic is on passenger side looks looks like. I have a hole where the one in your pic is but no line. I'll figure it out or just drive it with no brakes. Down shifting to stop...
  7. Slate

    What did you do to your deuce this week?

    Not sure I want to live anywhere I need a snow plow that heavy. Looks pretty awesome though [emoji108][emoji106] Sent from my moto z3 using Tapatalk
  8. Slate

    Rebuilt air pack why wont brakes release?

    This explains the first pic. It's always been crimped since I got it from fire dept. Was a Texas forest service truck. Maybe that why the pak failed. Next is the vent on top of air pak. Was this connected to glad hand at front or was this separate? Lastly just a random line crimped off near air...
  9. Slate

    Rebuilt air pack why wont brakes release?

    Maybe on the little air regulator side I was to generous with the cleaning and not enough with the lubrication. I'll probably take that side back apart and check it out. I know the can and piston are good. I spent a lot of time on that. Sent from my moto z3 using Tapatalk
  10. Slate

    Rebuilt air pack why wont brakes release?

    No glad hand on the front of this old girl. Sent from my moto z3 using Tapatalk
  11. Slate

    Rebuilt air pack why wont brakes release?

    I've got fluid that squirts back up when pedal released. Both holes seem to be clear in master. And I can hear piston in air pak go back and forth when brakes applied. It does that untill pressure builds up in lines and them pedal won't push anymore. And then no more squirting or anything for a...
  12. Slate

    Rebuilt air pack why wont brakes release?

    Can the piston on the back of the can get stuck on one side or the other, when put back together? Just thinking through it. Sent from my moto z3 using Tapatalk
  13. Slate

    Rebuilt air pack why wont brakes release?

    This little guy is the only bleeder that doesn't shoot fluid. It just trickles a little. Sent from my moto z3 using Tapatalk
  14. Slate

    Rebuilt air pack why wont brakes release?

    I even went over and over and didn't have any spare parts. After rebuild? I'm stumped. The system bleeds off it just takes all day Sent from my moto z3 using Tapatalk
  15. Slate

    Rebuilt air pack why wont brakes release?

    Bled well. And brake pedal is a rock Sent from my moto z3 using Tapatalk
  16. Slate

    Rebuilt air pack why wont brakes release?

    Pedal is all the way up on master cylinder. If that's what you mean. It comes to the point where it has just a little slack in it. Sent from my moto z3 using Tapatalk
  17. Slate

    Rebuilt air pack why wont brakes release?

    I recently rebuilt my air pack on my M54A2. Why won't my brakes release now? Seems to work fine brakes in and release air comes out tube. Everything moves correctly. A little help please? Sent from my moto z3 using Tapatalk
  18. Slate

    What did you do to your deuce this week?

    I'm tackling the dreaded airpack rebuild? I think it is harder than removing and working on the Hydrolic head. Look at the fun that was in it? Can was still good but nasty. The little end cap on piston was the hardest part. I cut some groves in my snap ring plyers and they held the little snap...
  19. Slate

    M54A2 IP Question

    Is there something like an oring I should look for here on IP pump under FDC, where throttle cable goes into pump. I am not gaining oil but have a leak of some sort on a starter cable from there. I don't need to burn it up. Also what kind of power steering fluid do you put in this type of...
  20. Slate

    Removing, rebuilding, reinstalling Hydraulic Head

    The wife said come eat now and I jumped. She's a good cook and I would hate to miss out. Now I have an M54A2 I'm going to do this on next. I'm guessing it Should be the same. Sent from my moto z3 using Tapatalk
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks