Search results

Yep, I run a Creality Ender 5 Plus which is an FDM 3D printer - a bigger version of Creality's Ender 5. Lower layer height does also increase strength. Unfortunately the nature of a 3D print's creation still renders them 50%-70% weaker than injection molded parts made from the same material...

Last I checked, replacement controllers for the truck are pretty expensive. Also, I'm unsure as to how much of the controller's functions are in the box itself rather than the power manifold under the truck - for example, is the Off button turning off the box, power manifold, or both?. I'd...

I don't think I'll ever go back to PLA as a regular printing material. ABS is physically tougher and has excellent temperature resistance. It also costs less per kg than PLA and can be smoothed out with acetone. It does, however, have a steeper learning curve in that it will warp without...

I'd start with the CTIS troubleshooting instructions in the TMs if you haven't already. TM 9-2320-386-24-1-1 has the unit-level troubleshooting instructions for the CTIS.

I have a functional parking brake and still use wheel chocks just in case. The fire departments all around where I live chock their trucks on-scene. The TM says to chock wheels when parked too.

Interesting, a Core XY unit! I really like the cartesian-style printers only because the bed only moves up and down. I started with a little bedslinger printer and will never go back! I recently read something on Tom's Hardware about a new FDM printer that uses magnetic linear motors (like...

The area I'm most concerned with are the screw slots on the mounting plate. Though the nice thing about slots and the ABS plastic that I plan to print this with is that it can be cut or sanded to size. I prefer to be as accurate as possible, but that's only possible when I have the actual part...

I completed a blank version of this box which can be seen here. Holes can be drilled into the blank to fit whichever switches, buttons, cannon plugs, etc. are desired. This was a request from a member here. This is a control box for a vehicle smoke grenade launcher. My references are only...

Anything can be printed with a big enough printer :p It's even possible to 3D print entire structures with pumped concrete! Reproductions like that involve some reverse-engineering. 3D scanners might help too, but only having read about them, consumer-grade ones like what I could afford...

Maybe one of the small trees you ran over twisted a ground connection under the truck and solved your problem? 🤷‍♂️ Interesting!

There are four seals involved in the hub CTIS, and they're all part of the quad seal: An o-ring on both the inner and outer bearing, and a ridged (it has an X-shaped cross section) in each of the bearing cups where the bearing bores protrude. The flange cap or flange gasket shouldn't affect...

I never realized that - cool!

That's all it weighs, about 600 lbs? I guess that's aluminum for you! Was there anything wrong with the body?

That's cool! Now I wonder where the ring mount went... :p

Is that holding the exhaust pipe guard on? It looks like a kind of bracket for that from this angle. I can't say I've seen many M44 or M39 trucks with a guard like that mounted.

The truck sounds great!

What part of the airpacks don't work? Are there fitment issues, or internal defects?

Have you performed any troubleshooting steps yet? Winch troubleshooting procedures are on page 0293 00-11 of TM 9-2320-386-24-1-2. Winch mechanical maintenance instructions are in the M35 multifuel manual TM 9-2320-361-34. Front winch hydraulics maintenance instructions are in M35A3 TM...

Hey, another truck owner in the Finger Lakes - welcome! Also nopics Well, pics of the rest of the truck anyway:p

I second the recommendation of taking the truck to a smaller shop. From my experience, commercial truck shops aren't really interested in working on former military trucks (or antique trucks for that matter) unless it's a HMMWV, and they'll make excuses to refuse to repair and/or inspect it...