Search results

Stonepicker1, Thanks for pictures!Would you say the correct one is fine thread? I cant tell from the pictures!I will search the # Thanks Tim

Can someone educate me about the injectors in a 84 m1009. Do I have to pull it to find out the thread/size ? I would like to change them but a pita to pull one just to get oedering info. Can anyone help with info?

Ditto 1 1/4 !

I tried to replace too, You must need a press! Im ordering the energy two pc. eye bushing instead.

Doghead, It works great and also tried in old door locks ,good as well! One thing is the electronic key cutters seem to cut a better key then the old school machine. I used the axxess system keys, their blank is a 7r which is the b46 j blank. If you go to lowes ,you know the cut is only as good...

Yes Sir! I tracked through old Gm #s And input from a retired Gm employee That Worked with military contacts.

UPDATE! Well after a ton of searching and visit to locksmiths the J code square key matchs as a blank for the cucv!So if you changed you door locks and are tired of having two round keys this is the fix! And you can get at lowes or home depot with the rubber head! enjoy! Tim

Tony thank you for the key offer!I may have not wooded my thoughs right. I have a few round keys but have seen square keys that was told they work,which are a J code. Which stamped on the shaft. I switched the door locks and now have two round keys which is a pita. Would like to know if there is...

OK, Guys ive been searching the forum on keys and know its the B blank but also hear it can be the J blank which is a square key. Can anyone with a square key look at the key to see if theres a j stamped in it! Thanks

Just break off tip and remove injector and remove the the pc of gp with needlenose or forsips. It worked for me after being screwed with chinese gps.

I use PB Blaster on everything that I think will be a pita! good stuff!

SWEET! Great job!

I used the Dornan one with a 20 % off coupon code p20 it was 60 bucks!

I just put in 2 weeks ago. Drivers side,middle plug ,facing up 12 oclock postion.:jumpin:

I did mine last weekend ,I took out the middle plug on drivers side.I removed lower rad hose to drain and you still alot antifreeze all over the place so be prepared. I hit one side of plug with big screwdriver to rock it sideways ,then grabed it with visegrips. About 1/2 hr total with pyutting...

You can get it in a 36" roll by 33 ft from abc supply or 84 lumber for 106.00 a roll!

Welcome jersey!

Ben, welcome aboard! Tim

WELCOME! From jersey!

ditto to everything SRJEEPER stated ! :D