• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. mkcoen

    Working on the MKT

    Hooked up and ready to roll! Still need to load the food but since I'm not leaving until Friday morning no sense letting it sit out in 85 degree weather (especially the chicken) - of course I'd have to have bought it to leave it out which hasn't happened yet either. About 77 miles from my...
  2. mkcoen

    Working on the MKT

    Mine works fine in the "down/locked" position but won't go all the way up to lock so I need to strap it up in order to pull it. If you could hold him to that quote that wouldn't be too bad. Mine came from SS member SCSG-G4 (who you should PM if you need stuff for your MKT) but it was...
  3. mkcoen

    Working on the MKT

    Welcome to the site! It's great to have another MKT in the group, especially one in TX. We'll have to get together and have one big cook out. Thanks for the appreciation but if you saw this in person you'd reconsider how good it looks. The tongue looks real nice and with the new travel...
  4. mkcoen

    Working on the MKT

    One of the major problems with this trailer is the frame is heavily rusted. It was stationed at Ellington Field in Houston so was exposed to a LOT of moisture. At some point it may seem easier to get another frame and swap the kitchen portion over to it than trying to resolve the issues with...
  5. mkcoen

    Is winter over yet?

    Just talked to my dad in N. Central Idaho. It's still snowing. He's hoping it'l quit before fall hits and starts the new cycle.
  6. mkcoen

    Working on the MKT

    I got the Travel Cover from SCSG-G4 in the mail today. I was able to get 3 sides on before having to take a break and wait for the wife to get home. This is definately a 2 person job if you have any walking issues - feed a couple inches, go to the back, pull, go back to the front and feed a...
  7. mkcoen

    full size from avatar thumbnail

    Vinnie's avatar. He has it in his photo albums.
  8. mkcoen

    Newbie gets an M1010

    Welcome to the M1010 club! I believe there was a M1010 body for sale in Spokane, WA. I can't remember but I believe it was in the classifieds (would have been back towards the end) so you might want to check there. Lavarok is the Pathfinder for all things M1010.
  9. mkcoen

    Shocked

    GL cures you of "instant gratification" illness.
  10. mkcoen

    Shocked

    He didn't "ask a question" about policy he made a statement and that statement was "this is stupid." When you go to someone's home for dinner you don't ask "is this all you got" or tell them "the food sux" Courtesy and politeness go a long way. The OP could have said he was "disappointed"...
  11. mkcoen

    Shocked

    Sorry, but this is where I stopped having any empathy for the OP. Since he can't have his way he's going to act like a 2-year-old and break his toys. That'll show us. As was mentioned earlier, he's been here a year and has less than 10 posts. The complaint about this being too heavily...
  12. mkcoen

    M37B1 to air on "MY CLASSIC CAR"

    Nicely done truck but not my style. I enjoy my MVs because I can paint them in the driveway without having to worry about how shiney it turns out and I'm not afraid to get it a little dirty. I've got a '57 Ford F100 in my shop that I've been dragging around for 19 years (and 12 moves) and have...
  13. mkcoen

    What did the AH1 Cobras on GSA go for?

    nopics Had to be said.
  14. mkcoen

    MKT newbie, volunteer for KP, boston area

    Could you get me a picture of the fuel connection at the hot water heater? I have 2 of these units but can't find the jerry can to heater line so need to try and fabricate something. Since the connector at the heater is a bit odd I can't even start without seeing one.
  15. mkcoen

    Working on the MKT

    Like I said previously, I'm not going to do a complete restoration on this trailer (the frame is pretty rough and I'll save major work on a keeper) but I wanted to dress it up a little bit. I started by painting the tongue before I put my new data plates on. In keeping with the military I...
  16. mkcoen

    Working on the MKT

    I thought about trying to find some take-off lines from another trailer but figured most of them wouldn't have been in much better shape than mine. That lead to just making a new set of lines. The hardest part was finding the correct compression fittings. Luckily the local hydraulic line shop...
  17. mkcoen

    Working on the MKT

    It's on a M103 frame (pretty much the same as a M105). At 5200lbs it's a chunk to have behind you without brakes. Doable in the deuce but since it's got them might as well use them.
  18. mkcoen

    Working on the MKT

    I have a big event coming up starting Apr 15 (besides my taxes) so thought I better start the PMCS on the MKT. Up to this point I've been concentrating on getting the "Kitchen" portion of the "Kitchen Trailer" cleaned and ready to go but want to make sure I get down the road safely. While...
  19. mkcoen

    understanding "mutilation required"

    Only if it's a driveshaft or tail light. Any other mutilation they make you cry while they laugh. (and yes I got the joke)
  20. mkcoen

    New V-100

    :ditto:Though some might not get the reference.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks