Search results

Mine will need replacement soon, its starting to seep from one side of the core. Any body have one laying around? I bet getting a new one made up would cost a fortune.

Where can I find the "alignment washers" that go on three of the studs to align the upper half of the rim to the lower half?

I have the front almost done, just need to put the steering block on and attach the drag link. The rear has been more interesting. had to cut off the u-bolts and then pound them out of the spring plates. The u-bolts that came with the kit were 1" too short (#@$%) had to get custom ones bent...

I am going to be buying a set of hmmvv rims and was wondering if anyone is traveling this way, would chip in some money for the fuel and your time. Let me know, thanks.

Mine is going bad and I seem to have lost my spare one. (FIGURES) Shoot me a PM if you have one that you would be willing to part with. I know that I could have mine rebuild, but I can't have the truck down for that long since its my daily driver. If you guys have one that needs to be rebuilt I...

could someone please take a couple of pics of the carborator section of their mep-18a. I am missing a couple of the springs and need to know where they connect.

Got any good pics of stuck tanks.

What genset is it for?

Could a field be added to allow people to use two email addresses on the site, I want to be able to have stuff sent to both my work address and home. Main reason is we can't get webmail from work.

I am fixing my right alternator mounting, the long bolt had been broke off in the cylinder head before I got the truck, so I stop cracking the lower bracket. Does anyone know the length of this bolt? The GM dealer gave me a part #, and said that it would take him a week to get the bolt. Also...

What are the proper terms for the fittings on the oil cooler lines? I want to run a bypass filter on the inner fender, but I won't cut the hoses to add fittings in the middle. (Had a leak issue that new fittings made even worse) I just want to be able to adapt the gm fitting to a standard and...

I am picking up a 52 gallon electric water heater for $50 and the best part ism it's in working condition.

Historic military vehicle displays, militaria displays, swap spaces available for military items only. Admittance is free! GENERAL JIMS SURPLUS / JAYS SPORTING GOODS ---- CLARE , Mi. Contact: Jeff Yost (517-386-3905)

http://cgi.govliquidation.com/auction/view?id=909873&convertTo=USD looks like someone rolled it, or dropped something heavy on it.

I have to replace the floor pans the rockers and patch the rear lower cab corner on both sides. If I get the time I will be installing the new inner fenders that I have had for the last 2 years, and might get around to fixing the minor rust behind the rear wheel opening. wish me luck, will take...

I am swapping the NP205 into my m1008, and need to get a hold of the complete shifter ass. from a truck that had it. also would the crossmember from a truck so equiped be a bolt-in item for my swap?

I am looking for info on how to go about researching the history of the cucv I have. It still has the bumper numbers on it, I know that the mean something on a duece, but am not sure if its the same on the smaller trucks. (14163) is the number stenciled onto the tailgate of the truck.

https://www.surpluscenter.com/item.asp?UID=2006051910043837&item=28-1577-C&catname=engines

I found a source of re-centered rims. you can get them with any mounting setup, and a backspacing of up to 4.75". they come with an insert to enable the beadlock feature of the rims and you can get them with a rock ring (its actually rebar welded to the rim lip) for extra protection. I will...

There are a few sets of humvee tires up for auction in aberdeen, If someone could get them somewhere near MI, I'll bid on a set of them. I'll pay for your trouble, any help would be appreciated as these almost never go up for auction up here in the land of a thousand lakes. they all seem to get...