Search results

  1. 4

    Dipper cylinder rod mystery , will not fold up 1.5"-4" short of latch. How to find what Length it should be?

    Turns out the rod was short! Went down to the machine shop and put a tape on it today, Guess I should have measured it before I took it down to the Machine shop but it was heavy and well boxed! The machine shop did also insist that the rod was the exact same length as the rusty one they...
  2. 4

    Dipper cylinder rod mystery , will not fold up 1.5"-4" short of latch. How to find what Length it should be?

    If you can please look up (SPEEDWOBLE) the FLU-419 M35C Whole Cylinder part # is G109186 I need to know the dipper GLAND LENGTH The Dipper has a different gland than the 580. The 580 uses the same gland for the SWING / Stabilizer / Dipper Cylinder. In the flu-419 M35C because of the folding...
  3. 4

    Dipper cylinder rod mystery , will not fold up 1.5"-4" short of latch. How to find what Length it should be?

    The latch on top rear of the cab, to secure the backhoe for driving. I am going out where I am working on the FLU419 today will report back, I was thinking/hoping maybe there is some air in the cylinder I will pull the dipper in all the way and then hopefully it will extend more so the handle...
  4. 4

    Dipper cylinder rod mystery , will not fold up 1.5"-4" short of latch. How to find what Length it should be?

    Thanks Frank! I bookmarked that site, very useful. I did talk to a part's guy in Kansas City yesterday, Jerry was his name; he said I could get the whole cylinder for $800 new from Case in Indiana. I spent about 600$ and now I need a new rod. I looked back at my messages to the Auction seller...
  5. 4

    Dipper cylinder rod mystery , will not fold up 1.5"-4" short of latch. How to find what Length it should be?

    Got the gland from Expedition Imports, so that gland should be right.
  6. 4

    Dipper cylinder rod mystery , will not fold up 1.5"-4" short of latch. How to find what Length it should be?

    Thanks Speed appreciate your help! My dad had a extendahoe years ago and I could never do it when I was a teen(only got a couple tries) this I got the first try lol, my bucket will not tuck like that up against the iron rail contour and this is the end result. It was latched when I got it I...
  7. 4

    Dipper cylinder rod mystery , will not fold up 1.5"-4" short of latch. How to find what Length it should be?

    So I ordered a replacement rod off a popular auction site, the seller had two listings with the same part #, I ordered it and 'poof' the rod was at my doorstep. I then took the cylinder with the rusty rod and the new rod and gland into the Machine shop. Long story short the handle pulls up...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks