Search results

  1. Speedwoble

    Dipper cylinder rod mystery , will not fold up 1.5"-4" short of latch. How to find what Length it should be?

    I confirmed the 35C and M35C use the same gland in my last line. I could not confirm all the differences between the 35C and the M35C. Known differences are the dipper cylinder(longer), the dipper arm(relieved for more angle), the backhoe mounting frame(hitch added, maybe narrower), and the...
  2. Speedwoble

    Dipper cylinder rod mystery , will not fold up 1.5"-4" short of latch. How to find what Length it should be?

    Here is where the 35C is in the catalog: I have photos of the prototypes from the 1980's and can confirm that they modified the dipper arm itself to swing tighter(It has paint burnt off so we know it was cut and welded on.) I don't know if they changed anything on the hydraulic cylinder, but...
  3. Speedwoble

    Dipper cylinder rod mystery , will not fold up 1.5"-4" short of latch. How to find what Length it should be?

    I checked against the CNH prints, and “CENTER OF HOLE TO END OF SHAFT 43-11/16 INCHES” checks out for G109187. They are 43.5 +/- a little bit. I’ll try to check the other rod prints on my break.
  4. Speedwoble

    Dipper cylinder rod mystery , will not fold up 1.5"-4" short of latch. How to find what Length it should be?

    When I am back at work, I can look up the prints. I can tell you, from the prototype photos I have seen, the dipper arms were modified from the backhoe version to fold tighter, but I didn’t think the cylinders were different. But have you stored the backhoe before the cylinder work? It is an...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks