Search results

  1. T

    My unimog 419 Will not go into pto gear

    Speedwoble you were right, all drive shaft bolts backed out from transmission. My problem is, I cannot figure out how to separate or have enough room to install new bolts. The drive shaft is in a water tight drive shat casing. I have removed rubber boot,, the 2 piece metal collar and a plastic...
  2. T

    My unimog 419 Will not go into pto gear

    Here are picks of drive shaft were connects to transmission were a couple of bolts are falling out thanks for heads up Speedwoble
  3. T

    My unimog 419 Will not go into pto gear

    Put truck in 4th gear did step on accelerator some speedometer does move some .Would this be indication of driveshaft bolt came backed out. Just asking I put 419 in 4 wheel drive
  4. T

    My unimog 419 Will not go into pto gear

  5. T

    My unimog 419 Will not go into pto gear

    The oil looks clean. Need to check if speedometer is working in 4th gear I thought it was. Good Question Need to check again Will crank up truck again and put in 4th gear and recheck
  6. T

    My unimog 419 Will not go into pto gear

    Yes Sir changed transmission oil 3 times with 80/95 gear oil. From all the plugs. Installed New gear shift collar that was problem first time was totally desegregated.. Gear shift worked smoothly after that. Put down clutch can here electrical solenoid engage. Let off clutch in first gear can...
  7. T

    My unimog 419 Will not go into pto gear

    Speedwoble ,, My 419 Unimog is stuck in neutral . I did everything you said earlier and my 419 was operating perfectly So I got confident and put on highway but broke down 4 miles away from home, everything working perfect was driving speed of 45 for first time and transmission went clunk...
  8. T

    My unimog 419 Will not go into pto gear

    LOL Absolutely, Thanks for the unimog student handout and other information I am much more confident how to proceed with your instructions.Thanks Speedwoble
  9. T

    My unimog 419 Will not go into pto gear

    You are correct here in GA. Ok Cool must be stuck with rust. Transmission was filled with water, drained a few times refilled with gear oil. Bought this unimog at a auction in County of Swainsboro GA maintenance department about 4 months ago. The City was using it untill they parked it 5...
  10. T

    My unimog 419 Will not go into pto gear

    Thanks for responding, However I am a new owner of this unimog 419 And had to replace the 8 speed gear shift supporting collar already now gears shift smoothly. But still won't go into PTO gear , shift lever is stuck foward, Is there something I'm missing, does unimog need to be in a...
  11. T

    My unimog 419 Will not go into pto gear

    PTO shift lever in cab is stuck foward will not shift into PTO for backhoe ,any suggestions thanks
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks