Search results

  1. J

    FLU419 SEE HMMH HME Owners group

    it's not that difficult smart ass! you can figure it out for yourself
  2. J

    FLU419 SEE HMMH HME Owners group

    https://www.baileysonline.com/ try a real logger supply. if you know the pitch and number of links getting chain isn't a problem. neither is the bar.
  3. J

    Generator to charge vehicles, Hummer Ford Tesla Volt

    just looking at this in a different angle. would a cheap used gasoline or diesel powered car keep you mobile until utility power is restored?
  4. J

    MEP-003A

    https://www.steelsoldiers.com/threads/mep-002a-governor-linkage-broken.75575/
  5. J

    MEP-003A

    https://www.thingiverse.com/thing:373769
  6. J

    MEP-003A stalling under high load test?

    does the set have alternative fuel in it????
  7. J

    MEP-003A stalling under high load test?

    sounds like you found it. take that injector and swap with another to see if the problem persists in that cyl. adjust the valves first though.
  8. J

    MEP-003A stalling under high load test?

    i have used one of those laser thermometer to look at each cyl at startup and again afer load. a cool cyl usually means a problem in that area.
  9. J

    MEP-003A stalling under high load test?

    in my opinion... i would check that little control linke age that runs from the governor arm to the fuel control arm on the fuel pump. then adjust the valves
  10. J

    MEP-026 brass float

    my favorite quote is. "as useful as tits on a boar hog".
  11. J

    MEP-026 brass float

    also need to know how you expect to be paid? reminder
  12. J

    MEP-026 brass float

    thanks .
  13. J

    MEP-026 brass float

    pm sent
  14. J

    Advice needed. Which genset for off grid?

    yes. i wouldn't even pretend to know what you need. just trying to show you what an 002A can do so you have more info to make decisions with.
  15. J

    Advice needed. Which genset for off grid?

    the only answer i have is that is works and has for many years. and for many days extended. the one thing that i do is when i bring the gen on line everything is off and i add each load independently until they begin to cycle. remember that everything cycles on and off at random so the main...
  16. J

    MEP-002A just shuts off

    there is a small button on the front near the 120 volt outlet. that button is the DC breaker. but i think it would have to be reset and that doesn't sound like your problem. could be the constant speed switch? is the fuel solenoid shutting down the engine?
  17. J

    002a fuel line replacement

    i have used a file to remove the crimp sleeve from the old fittings and used regular fuel hose from the auto store. just put a couple of clamps on for security. been working for years
  18. J

    Advice needed. Which genset for off grid?

    i may be repeating myself. if so please forgive me. a little real world experience but with an 002A. i run my whole house and ranch on one 002A sometimes for weeks at a time. the house is 1500 sqfeet central gas heat,220 volt 1.5 hp submersible well pump running the house and watering 200...
  19. J

    will a 1.5 kw 28VDC generator jump start an 003A

    Thanks. is there a separate panel that goes between the 1.5 KW generator and the batteries to just charge the batteries? or i guess i am asking if there is some kind of charge controller or DCVR to protect the batteries?
  20. J

    will a 1.5 kw 28VDC generator jump start an 003A

    will the 1.5 KW 28VDC generator charge and jump the 002a 003a generators?
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks